Pulling partout-Built Dana 80, 94-02 Flexalite, etc

5shifter

5shifter

New member
Joined
Apr 3, 2008
Messages
264
All prices are pretty firm

Dana 80-Haisley spool (one of the original styles--built heavier), 37 spline axles, Brand New Yukon 4.88s, Girdled, 1550 yoke. Everything is setup ready to bolt under a truck. Best of the best parts
$3300

Driveshafts--setup for an NV4500 and DHD 2nd gen reg cab long bed.
Front is for a 1410 yoke I believe. The rear is for a 1550 yoke.
$1300

Steel dually rim spacers (between drum and wheel). Will work with 17" steel wheels, I don't know about others
$100

94-02 Flexalite fan
$360 shipped

Flamecut IH weights-around 550 lbs total--7 weights total slightly varying weights. Hangs on angle iron easily
$400

17" Dodge steel dually wheels
$50 each

I've got some more odds and ends parts. I'll update here in a few days

Items located around Muncie, IN
 
Only thing I have is the driveshaft, but yes I will separate it from the rear driveshaft.

Message me your zip code and I will come up with a shipped price.
 
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpsedukziji.jpg.html"]image_zpsedukziji.jpg Photo by 5shifter | Photobucket[/ame]

[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zps2czq8gvy.jpg.html"]image_zps2czq8gvy.jpg Photo by 5shifter | Photobucket[/ame]

[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpst7l0byyi.jpg.html"]image_zpst7l0byyi.jpg Photo by 5shifter | Photobucket[/ame]

[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpscnxsvldz.jpg.html"]image_zpscnxsvldz.jpg Photo by 5shifter | Photobucket[/ame]
 
I'll get some pics of the weights here after work and post them up in here.
 
Weight pics
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpsgyab1fww.jpg.html"]image_zpsgyab1fww.jpg Photo by 5shifter | Photobucket[/ame]
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zps2wm9rvkt.jpg.html"]image_zps2wm9rvkt.jpg Photo by 5shifter | Photobucket[/ame]
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpshu03ssku.jpg.html"]image_zpshu03ssku.jpg Photo by 5shifter | Photobucket[/ame]
 
Stainless sheet roll pan with sled stops. One corner has a bend in it but can be straightened out easily. $100
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpsxd8radvv.jpg.html"]image_zpsxd8radvv.jpg Photo by 5shifter | Photobucket[/ame]
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpsu0t2kqhg.jpg.html"]image_zpsu0t2kqhg.jpg Photo by 5shifter | Photobucket[/ame]
URL=http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpsowfcp36a.jpg.html]
image_zpsowfcp36a.jpg
[/URL]
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zps2pbdvh3n.jpg.html"]image_zps2pbdvh3n.jpg Photo by 5shifter | Photobucket[/ame]
[ame="http://s285.photobucket.com/user/5shifter/media/Mobile%20Uploads/image_zpslyxlymem.jpg.html"]image_zpslyxlymem.jpg Photo by 5shifter | Photobucket[/ame]

Also have a Pulling Products adjustable hitch-$175 shipped
2-3 gallon aluminum fuel cell. Square shape $50
 
Last edited:
Sorry for all the links and not direct pictures. Let's try this again.

Dana 80 rear end with girdle. Tubes welded. 37 spline axles with spool. New Yukon 4.88s, never seen the dirt. 1550 yoke. Filler cap lets you get extra gear oil in. Came from 2.6 truck before going to 3.0. As bulletproof as you can get a stock driveline rear-end. (tires and wheels not included)

image_zpsplhd1t1c.jpg

image_zpsedukziji.jpg

image_zpswx94glem.jpg

image_zpscnxsvldz.jpg

image_zps2czq8gvy.jpg

image_zpst7l0byyi.jpg


Weights
image_zpshu03ssku.jpg

image_zpsgyab1fww.jpg


Stainless roll pan with sled stops
image_zpsxd8radvv.jpg

image_zpsowfcp36a.jpg

image_zpsu0t2kqhg.jpg

image_zps2pbdvh3n.jpg

image_zpslyxlymem.jpg
 
I'll do $500+shipping on the front driveshaft. $800+shipping on the rear driveshaft.

We split the cost of whatever it costs to ship.
 
Great seller here guys. I bought the fans. Extra care taken when boxing to ship and extremely fast shipping. Couldn't deal with a better guy
 
Bump for what's left

Should be able to bring this stuff to Indy this weekend if someone let's me know ahead of time and we can't get back in the fields.

Dana 80-Haisley spool (one of the original styles--built heavier), 37 spline axles, Brand New Yukon 4.88s, Girdled, 1550 yoke. Everything is setup ready to bolt under a truck. Best of the best parts
$3300

Driveshafts--setup for an NV4500 and DHD 2nd gen reg cab long bed.
Front is for a 1410 yoke I believe. The rear is for a 1550 yoke.
$1300

Steel dually rim spacers (between drum and wheel). Will work with 17" steel wheels, I don't know about others
$100

Flamecut IH weights-around 550 lbs total--7 weights total slightly varying weights. Hangs on angle iron easily
$400

2-3 gallon aluminum fuel cell. Square shape $50


Stainless sheet roll pan with sled stops. One corner has a bend in it but can be straightened out easily. $100

I've also got an air/water cooler that fits in behind the bumper nicely. This was on a 3rd gen, but should work with a 2nd gen. Might have to make some adjustments on the cooler piping. Worked great with a 2.6 S475--$1000 shipped OBO. This is not a Frozen Boost cooler
 
Last edited:
Back to the top

Cash talks on this stuff, give me some offers. Worst I can say is no
 
Bump and updating some pricing. Let's get this stuff back on the track

5shifter said:
Dana 80-Haisley spool (one of the original styles--built heavier), 37 spline axles (only 3-4 runs), Brand New Yukon 4.88s, Girdled, 1550 yoke. Everything is setup ready to bolt under a truck.
$2400

Driveshafts--setup for an NV4500 and DHD 2nd gen reg cab long bed.
Front is for a 1410 yoke I believe. The rear is for a 1550 yoke.
$1000

Flamecut IH weights-around 550 lbs total--7 weights total slightly varying weights. Hangs on angle iron easily
$400

2-3 gallon aluminum fuel cell. Square shape $50


Stainless sheet roll pan with sled stops. One corner has a bend in it but can be straightened out easily. $100

I've also got an air/water cooler that fits in behind the bumper nicely. This was on a 3rd gen, but should work with a 2nd gen. Might have to make some adjustments on the cooler piping. Worked great with a 2.6 S475--$750 shipped OBO. This is not a Frozen Boost cooler
Click to expand...
 
You must log in or register to reply here.
Back
Top