Dunrite built with no hours, 47-re came out of a 2000 4x4(same as goerend) New triple disc converter with the same stator as goerend.
This trans has some upgrades and comes with warranty, I also have a transfer case available.
I'm hoping to get 2500 for it. It has a billet triple disc converter with the custom low stall stator that Goerend uses and the same valve body upgrades that Goerend uses (these were designed by Tony Garson of Dunrite converters). It also has a Steel piston pressure regulator and extra oil passages cut for the OD and planetary's, and extra clutches different ratio apply arms and a deep sump oil pan. The shifts are firm but not harsh.
It does not have the upgraded shafts in it and I have been told that they seem to break as often as the stockers.
The converter is new in a box and the trans was rebuilt with everything new and not installed.
315# is the weight.
Check on shipping it to 21237 commercial address. This is for B4wheeler.
Also if you could give me you zip i can get some rates. We get ridiculous discounts on shipping, so it would be cheaper for John to ship it to my work freight collect.
Trying to help out a friend.
I would suggest that you call me at 858-361-7115 I will be shipping it from the loading dock, I will put it on a pallet and box it in. I would find the nearest loading dock to San Diego.
I have a message into the build shop to call me. He must be on a test drive.
I would rather not separate the converter, but I do know that they cost 1425 plus shipping and a 300 dollar core. the converter that comes with this trans is new in the box.