Scheid Lightning 2.6 Turbo

[cummin try me]

Scheid Lightning 2.6 turbo 41102. 71mm compressor wheel clipped into a 2.6 race cover. Exhaust housing is a 2.31" Divided T3 housing. Has normal radial play; no axial play. Comes with blanket, downpipe, and clamp. $1250 shipped OBO

 

[cummin try me]

Bump, link to turbo on Scheid's site:Turbo for 1994-2002 Dodge :: Turbochargers :: Scheid Diesel

 

[diesel_importer]

Forgive me if this is a dumb question, but is this an s300?

 

[cummin try me]

As far as I know, yes.

 

[cummin try me]

Correction: This is an s400 frame charger.

 

[strokin359]

It's based off of a gt42 not a s400

 

[Smokem]

It's based off of a gt42 not a s400

Some Scheid chargers are, but the one shown is clearly a Borg Warner frame.

 

[strokin359]

Your right I should of looked at it better srry for the wrong info on it bump for you

 

[zstroken]

When the lightnings first came out, they were made from about 4 or 5 different turbos IIRC.

 

[diesel_importer]

So, this is an S471 clipped down to 2.6". How do you convert 2.31" to cm2 or A/R ?

Also, is it weird or uncommon for this size turbo to have be T3?

 

[cummin try me]

So, this is an S471 clipped down to 2.6". How do you convert 2.31" to cm2 or A/R ?

Also, is it weird or uncommon for this size turbo to have be T3?

Yes this is an s471 clipped intpo a 2.6" I will try to get measurements and convert it to an A/R for you. It is somewhat uncommon for it to be a T3 but Scheid makes it so it is a bolt on. It has a T3 and the compressor housing will bolt right up to the hx-35 elbow where with a normal s400 you would have to get a different elbow and clamp.

 

[cummin try me]

bump

 

[1stgensleeper]

Pm sent on turbo.

 

[cummin try me]

bump

 

[cummin try me]

bump

 

[cummin try me]

bump

 

[cummin try me]

bump

 

[cummin try me]

bump

 

[cummin try me]

bump

 

[freight train]

what would be the A/R ratio on the 2.31" housing?