Scheids 2.8 Class

My Guess is the top 2.6 Trucks have got to be around the 900-1100hp. All THings considered theres not much different to a 2.8:st:
 
12VHotrodder said:
My Guess is the top 2.6 Trucks have got to be around the 900-1100hp. All THings considered theres not much different to a 2.8:st:
Click to expand...

900hp?? I don't think that much or anywhere close to 1100hp? I think Wesley Wade took 4th out at Scheids and I don't think his CR is pushing 900hp. They guys that were pushing 900-1100 hp are the guys that took the top 3 spots whisch were 2.8 3.0 trucks at heart.
 
I don't know that you could flow enough air through a 2.6 inlet to produce that much power. Not without water or nitrous. Which isn't supposed to be allowed.
 
Kman9090 said:
600hp??? Um a 2.6 with 600hp isn't even gonna finish in the top 20 at scheids unless they have a awesome set up. Top 2.6 trucks are probably pushing 750-850hp. 2.8 trucks I don't know i would venture to say anywhere between 700-950hp.
Click to expand...



My guess would be less. But what do I know? $.02
 
TrailerproPop said:
My guess would be less. But what do I know? $.02
Click to expand...

Less than what? I know my tuck is aroung 600-650 and guys like Ben Duvall and Ron Darin will hand it to me everytime I hook aganist them and I know Ron Darrin's truck put down like 758?? It takes a good 750hp to be on top at scheid if not more...
 
Kman9090 said:
Less than what? I know my tuck is aroung 600-650 and guys like Ben Duvall and Ron Darin will hand it to me everytime I hook aganist them and I know Ron Darrin's truck put down like 758?? It takes a good 750hp to be on top at scheid if not more...
Click to expand...

Ya I put down 775hp @1489tq on the dyno friday but he couldn't get it lit for more than a second so I would sat there was trucks in the 2.6 class around 900hp at motor and a know of a couple of 2.8 trucks that were 1100 hp at motor.
 
Smokindiesel said:
Congrats, to everyone we had a great time, Yes, we hurt her a little in the rehook and couldnt really light the charger down low like we needed to but thats sled pullin.... We will be tryin for indy for sure.. se everyone there:clap:
Click to expand...

What did you guys hurt i noticed it didnt come up real quick
 
At The Flywheel is what I meant ( sorry should have noted that) Rear wheel doesn't get thought about much when all you see is the engine on the dyno!
 
Kman9090 said:
900hp?? I don't think that much or anywhere close to 1100hp? I think Wesley Wade took 4th out at Scheids and I don't think his CR is pushing 900hp. They guys that were pushing 900-1100 hp are the guys that took the top 3 spots whisch were 2.8 3.0 trucks at heart.
Click to expand...

man you guys are but hurt, the winner of 2.6 is not no where near 900 barley over 750 on a engine dyno, maybe setups do actually count and its not all power
 
I don't really care I was just taking and educated guess... I've also seen a 2.8 truck around here that everyone know was pushing at least 800 do 450hp on a dyno... so a pulling truck on a dyno the only thing thats good for is to whipe my a$$ with unles it's an engine dyno.
 
You must log in or register to reply here.
Back
Top