I ran a blown steering stabilizer for about a year and a half with a lift and 35's but had a beefy track bar I made (2" poly bushing up top, 3/4x3/4" heim on the axle) and didnt have an issue. After three years, I did have to replace my heim, but I was living in the UP of Michigan and it eats anything not greasable.
Just make a box and weld it onto the frame to fit a home made track bar. Then use a 3/4x3/4 heim on the bottom with misalignments and you can have a rock solid track bar and no death wobble for about $100.
Go to RuffStuffSpecialties.com I like their heims and they are cheap.
Also another cool trick I learned when I was broke and liked wheeling Jeeps, run the steering stabilizer between the track bar and the steering linkage from the steering box to the knuckle (or other arm if you have inverted-y).