single turbo 12 valve big hp

strokersmoker

strokersmoker

New member
Joined
Jun 20, 2007
Messages
539
what will it take 2 run 800-900hp on a single turbo 12 valve. it will be a pull truck only thanks for the help
 
I would say you will need alot of fuel if you plan to get it lit. And I know where you can get everything.:hehe:
 
If it is a pulling truck I don't think they can use NOS can they? Maybe get a GT4202 with a 1.01 Housing or an S475 with a 1.10 housing. But I really have no idea lol. Joe Hellmann has a K-31 and an HX-80 for sale, maybe one of them?
 
Auto or manual?? Manual will probably be fine with a 1.1. Don't be afraid of 4500+ though.
 
I have ran a silverbullet and an s400. Isn't the silver bullet a 74/80?? You will find that the silver bullet spools much much much easier than the s400. I do have another s400 with a .9 a/r turbine housing that I am gonna try to get on the truck. Silver bullet would make for a nice driving puller. The s400 will move more air though.
 
i am going 2 stay under 4500 rpm,and i want 2 stay witha single turbo so i can pull in street stock class.i was planin on a pump inj and maby turbo from ind inj. head fron pdr.haisley dd. fass fuel system.big lines.120. max spool cam,aney tips or sugestins
 
not posible or what. i was shootin high. there is a truck around us running close 2 a 1000hp on a single. wickedmegacab is running close to 1200hp in a single
 
I am hearing that the top running street trucks are turning 900-950 on an engine dyno. So figure drivetrain losses. 3" s400 is not far off from the 800 hp mark.
 
I run 1200hp on the dyno with a Phat Shaft 71. They dont have it on there web site but you can call shane or brett and they will hook you up.
 
thats what i was lookin at. what r u w/o juice 850. u think i can get 800-900 out of a 12 valve no juice, and a single
 
strokersmoker said:
what will it take 2 run 800-900hp on a single turbo 12 valve. it will be a pull truck only thanks for the help
Click to expand...


If im not mistaken

Garrett from Pure diesel power has that much hp.. im sure he can help you out....

Rick
 
the under 4500rpm is going to be a big issue if your wanting to spin a 1000hp single . it becomes a bigger problem when you start to talk about runnin big bushings on some of the chargers that you will need to make that hp.why do ya think they have super street classes.
 
You must log in or register to reply here.
Back
Top