justinlw
New member
- Joined
- Apr 3, 2009
- Messages
- 4
Hey Dan,
I have a 150/90-2014 that has been having priming problems. Any time I drain the water separator or change the filter I can not get it to prime on it's own. If I crack the filter it will prime, but if I don't go drive the truck around for at least 10min afterwards it will lose prim again when the key turns off. Any suggestions? I believe the pump is still under warranty.
I am running an 80# spring with a -10psi fitting that I got from David at DI. The pump is hooked into the factory lines as shown in the instructions, and I hardly have any return flow back to the filler neck. Could the pump be leaking internally?
Thanks,
Justin
I have a 150/90-2014 that has been having priming problems. Any time I drain the water separator or change the filter I can not get it to prime on it's own. If I crack the filter it will prime, but if I don't go drive the truck around for at least 10min afterwards it will lose prim again when the key turns off. Any suggestions? I believe the pump is still under warranty.
I am running an 80# spring with a -10psi fitting that I got from David at DI. The pump is hooked into the factory lines as shown in the instructions, and I hardly have any return flow back to the filler neck. Could the pump be leaking internally?
Thanks,
Justin