SHughes
Too much is never enough!
- Joined
- Jan 7, 2008
- Messages
- 9,289
I have other obligations that require money I don't have (I need to remodel my rental property so I can sell it)...so I am selling my diesel project. The truck sold without the drivetrain, so that is all I have left to sell.
I would prefer not to part it out just yet; I simply have too much going on to deal with that at the moment. EVERYTHING diesel related I have will go as a package deal!
Engine:
P-Pumped 24 Valve built by Mumau Diesel; STORM Block, Diesel Pros "Killer B" cam, CDS built pump with Westons 7mm Comp DV's, .093 DV holders and 4k springs (pump will flow 550cc @ 5500 RPM with the right GSK), .093 Stainless lines from Schied's, ported CR head with 8x.009 VCO Injectors rebuilt and flow tested by Timebomb, ATS 3 piece T3 exhaust manifold and 3rd Gen style 66mm turbo, billet tappet cover, 2nd gen or 3rd gen valve cover (your choice), Fluidamper race balancer (does not have the belt pulley).
The engine has approximately 4-5000 miles on it since the rebuild. It made 807 HP with bigger injectors, compound turbos (a 62 over an 83) and a stock plate in the pump. A lot more available with the right air and fuel.
Two Wheel Drive Transmission:
47 RE Rebuilt by Banghart Diesel with Goerend parts, Goerend converter (I forget what stall it is), Goerend full manual valve body.
Trans has less than 1000 miles since the rebuild.
Extras:
I have an AirDog 2 fuel pump that needs a new motor, it got fuel in it at some point and shorted the motor. A replacement motor is far cheaper than a whole new pump, comes with brand new filters.
I also have a water injection system I never used. It flows 1 GPM @ 1100 psi and has fours nozzles with four or five jet options for each.
I even have two driveshafts (one steel and one aluminum) I can throw in.
Asking $10,000 for the whole package. Not interested in shipping it, but I'm sure we can work something out for delivery.
I'm sure I forgot to mention something, I'll add to this as needed.
Thanks for looking,
scott
I would prefer not to part it out just yet; I simply have too much going on to deal with that at the moment. EVERYTHING diesel related I have will go as a package deal!
Engine:
P-Pumped 24 Valve built by Mumau Diesel; STORM Block, Diesel Pros "Killer B" cam, CDS built pump with Westons 7mm Comp DV's, .093 DV holders and 4k springs (pump will flow 550cc @ 5500 RPM with the right GSK), .093 Stainless lines from Schied's, ported CR head with 8x.009 VCO Injectors rebuilt and flow tested by Timebomb, ATS 3 piece T3 exhaust manifold and 3rd Gen style 66mm turbo, billet tappet cover, 2nd gen or 3rd gen valve cover (your choice), Fluidamper race balancer (does not have the belt pulley).
The engine has approximately 4-5000 miles on it since the rebuild. It made 807 HP with bigger injectors, compound turbos (a 62 over an 83) and a stock plate in the pump. A lot more available with the right air and fuel.
Two Wheel Drive Transmission:
47 RE Rebuilt by Banghart Diesel with Goerend parts, Goerend converter (I forget what stall it is), Goerend full manual valve body.
Trans has less than 1000 miles since the rebuild.
Extras:
I have an AirDog 2 fuel pump that needs a new motor, it got fuel in it at some point and shorted the motor. A replacement motor is far cheaper than a whole new pump, comes with brand new filters.
I also have a water injection system I never used. It flows 1 GPM @ 1100 psi and has fours nozzles with four or five jet options for each.
I even have two driveshafts (one steel and one aluminum) I can throw in.
Asking $10,000 for the whole package. Not interested in shipping it, but I'm sure we can work something out for delivery.
I'm sure I forgot to mention something, I'll add to this as needed.
Thanks for looking,
scott