Lb7_Katie
New member
- Joined
- Jul 3, 2013
- Messages
- 184
depending what you can work out labor wise looking at less then ~10k parts
that's rods, piston, HS/MS, keyed crank/cam and waterpump, large single CP3 and either large turbo or twining the stock turbo with a 75-80mm turbo will get you really close to that. twining the stock would make for a very reliable DD
i have built a short block for ~7k. i just did a bore and balance using mahle race cast pistons for ~3500.00
Labor is free. Other than any machine work just have to pay for parts.
Sent from my iPhone using Tapatalk - now Free