Scheid / arias Pistons - stock bore, 14:1 compression, valve reliefs, coated, with rings, coated hardened wrist pins $2000
Haisley billet rods with arp rod bolts $3500
No limit manufacturing billet main caps $800
No limit manufacturing 3/4" thick main girdle with bolts $800
14mm xxl haisley main studs $500
14mm head studs haisley $700
Polished crank ready to go $500
Filled 12v block that has being line bored for above crank with stock caps and torque plate honed $500
Scheids stainless prebent .120 lines $400
Hamilton head that has been ported max with shelf cut all by Wagler and big valves with springs, keepers, guides installed ready to go $5000
No limit manufacturing billet roller rocker setup 1:7 ratio with billet valve cover with longer 14mm studs for this setup $4500
No limit manufacturing billet cam matched to above head, pistons, and roller rocker setup $900
Scheids standard pulling cam 212/234 $600
No limit adjustable cam gear $400
Scheids international style 12v injectors 5x22 with billet hold downs $3000
Scheid front billet cover $350
Haisley freeze plug set (front, rear, all sides) $250
Keating side cover $275
Keating oil filter block off $125
Keating oil pump block off $50
Adjustable pump gear $200
12v fluidamper - competition $400
I'm sure there are a few more things I need to list as I go through it all but all of it is really a matched set so if someone was interested in it all since it goes together I would make a package deal.
Pictures will be loaded later.
Pm with any questions
Haisley billet rods with arp rod bolts $3500
No limit manufacturing billet main caps $800
No limit manufacturing 3/4" thick main girdle with bolts $800
14mm xxl haisley main studs $500
14mm head studs haisley $700
Polished crank ready to go $500
Filled 12v block that has being line bored for above crank with stock caps and torque plate honed $500
Scheids stainless prebent .120 lines $400
Hamilton head that has been ported max with shelf cut all by Wagler and big valves with springs, keepers, guides installed ready to go $5000
No limit manufacturing billet roller rocker setup 1:7 ratio with billet valve cover with longer 14mm studs for this setup $4500
No limit manufacturing billet cam matched to above head, pistons, and roller rocker setup $900
Scheids standard pulling cam 212/234 $600
No limit adjustable cam gear $400
Scheids international style 12v injectors 5x22 with billet hold downs $3000
Scheid front billet cover $350
Haisley freeze plug set (front, rear, all sides) $250
Keating side cover $275
Keating oil filter block off $125
Keating oil pump block off $50
Adjustable pump gear $200
12v fluidamper - competition $400
I'm sure there are a few more things I need to list as I go through it all but all of it is really a matched set so if someone was interested in it all since it goes together I would make a package deal.
Pictures will be loaded later.
Pm with any questions
