Tons of 12v engine parts - comp. parts

Scheid / arias Pistons - stock bore, 14:1 compression, valve reliefs, coated, with rings, coated hardened wrist pins $2000

Haisley billet rods with arp rod bolts $3500

No limit manufacturing billet main caps $800

No limit manufacturing 3/4" thick main girdle with bolts $800

14mm xxl haisley main studs $SOLD

14mm head studs haisley $700

Polished crank ready to go $SOLD

Filled 12v block that has being line bored for above crank with stock caps and torque plate honed $SOLD

Scheids stainless prebent .120 lines $SOLD

Hamilton head that has been ported max with shelf cut all by Wagler and big valves with springs, keepers, guides installed ready to go $5000

No limit manufacturing billet roller rocker setup 1:7 ratio with billet valve cover with longer 14mm studs for this setup $4500

No limit manufacturing billet cam matched to above head, pistons, and roller rocker setup $900

Scheids standard pulling cam 212/234 $600

No limit adjustable cam gear $400

Scheids international style 12v injectors 5x22 with billet hold downs $3000

Scheid front billet cover $350

Haisley freeze plug set (front, rear, all sides) $250

Keating side cover $275

Keating oil filter block off $125

Keating oil pump block off $50

Adjustable pump gear $SOLD

12v fluidamper - competition $400
 
It needs one, its drilled and tapped for a tater built intake or I have a Aluminum plate as I was going to build my own.
 
jmiltier said:
It needs one, its drilled and tapped for a tater built intake or I have a Aluminum plate as I was going to build my own.
Click to expand...

Ok cool I figured you had a flange to build your own at least. Can you send some pics to my cell? 209-617-7072
 
questions about the dampner - it is a competition unit so it has not place for a belt at all.
 
Scheid / arias Pistons - stock bore, 14:1 compression, valve reliefs, coated, with rings, coated hardened wrist pins $1800

Haisley billet rods with arp rod bolts $3300

No limit manufacturing billet main caps $700

No limit manufacturing 3/4" thick main girdle with bolts $700

14mm xxl haisley main studs $SOLD

14mm head studs haisley $600

Polished crank ready to go $SOLD

Filled 12v block that has being line bored for above crank with stock caps and torque plate honed $SOLD

Scheids stainless prebent .120 lines $SOLD

Hamilton head that has been ported max with shelf cut all by Wagler and big valves with springs, keepers, guides installed ready to go $4800

No limit manufacturing billet roller rocker setup 1:7 ratio with billet valve cover with longer 14mm studs for this setup $4300

No limit manufacturing billet cam matched to above head, pistons, and roller rocker setup $700

Scheids standard pulling cam 212/234 $500

No limit adjustable cam gear $350

Scheids international style 12v injectors 5x22 with billet hold downs $2800

Scheid front billet cover $300

Haisley freeze plug set (front, rear, all sides) $225

Keating side cover $250

Keating oil filter block off $110

Keating oil pump block off $SOLD

Adjustable pump gear $SOLD

12v fluidamper - competition (no belt) $350

Haisley 3/8" Thick Girdle $225 Shipped

Stock 12v cam $75ea

Stock 12v cam with gear $100
 
You must log in or register to reply here.
Back
Top