I just read over the rules for Scheid's. Hanging weights, dual fuelers, and bushings allowed? Aren't some of the strong 2.8 and 3.0 trucks gonna bush down and kick ass? What were the 2.6 rules last year? I was thinking it was single fueler and bushings allowed which kept some of the big trucks out. Just curious.
Turbocharger: The vehicle is limited to a 2.6 inducer single turbocharger.The reducer has to be within 3/4 “ of the compressor wheel.The 2.6 bore has to be maintained for ¾”. The inlet will be measured using a 2.65 inch plug the plug must not be able to enter the inducer bore. A stock map width enhancement (MWE) groove is allowed. No MWE groove will be allowed that has a width greater than .200”. All provisions allowing air into the wheel other than via the bore and the MWE groove are prohibited.
:cheer: KY ALL THE WAY!!:cheer:
:hehe:
01ppump, blownsmoke2 are going to be first and second!
I think that the two best 2.6 trucks from ohio are Mr. Bennet and Mr. Swanson.
I know this is off the subjest of 2.6 trucks but will Troy Wakeman be bringing his rig up there again this year?
His name is Kevin Very Good truck!