turbo suggestions

[DTanklage]

too smalll for bottom charger might be a good single with external gate?

if its ett and the ex housing is not too big

look for a number with a decimal point in it

cast into the housing

on the inside where the ex gases go into it

 

[Ph4tty]

So its an s400 t-4 you said, and the exhaust housing has a 125 on it so its most likely a 1.25 housing. You'll need a lot of rpms to run something like that as a single, but a tighter exhaust housing or custom t-3 housing would make that thing come alive. I know you can get a .90 housing for a s400 in t-4.

 

[jeffreystewart]

So its an s400 t-4 you said, and the exhaust housing has a 125 on it so its most likely a 1.25 housing. You'll need a lot of rpms to run something like that as a single, but a tighter exhaust housing or custom t-3 housing would make that thing come alive. I know you can get a .90 housing for a s400 in t-4.

Any idea where i can get a smaller housing?

 

[jeffreystewart]

anybody? i cant find one anywhere

 

[DTanklage]

you must not have looked very hard

try FI

Borg Warner TurboDriven