NickTF
Single turbo turd.
- Joined
- Jun 4, 2007
- Messages
- 5,887
I have a stock head and cam. I have a 50mm ED gate I need to get welded up and put on but it will never see use with the t66 because I don't see being able to use the current intake setup with it and will not be changing it up for a charger i'm only going to run another 2-3 weeks.
Drive pressure was measured about 1-2" from the turbine inlet flange. Your wish will be granted regarding manifold vs. header. Only thing is the gauge I have for drive is clogged up and I'll be running something a bit different. Hope to get a chance to run the new drive setup on the t66 though but won't be able to before the header comes off.
Drive pressure was measured about 1-2" from the turbine inlet flange. Your wish will be granted regarding manifold vs. header. Only thing is the gauge I have for drive is clogged up and I'll be running something a bit different. Hope to get a chance to run the new drive setup on the t66 though but won't be able to before the header comes off.