bigbore050
The Original Rookie
- Joined
- Jun 22, 2010
- Messages
- 147
Are you talking about machining the dog rings to accept a large 4 lug type pattern like the things liberty does to older 4speeds or what?
I dont know how familiar you are with the 5600 but if you look at the 1-2 sencro block it is a 3 pice setup witch gives twice the surface contact on the rings(O.D. and I.D.) than the other 2 pice setup(only the O.D. of the ring is used) thats throughout the rest of the transmision and the 3 pice also does not alow the rings to be compressed too far durring a hard shift causing them to break. So we are going to adapt the 3 pice to the rest of the transmision similar to the 1-2 blocker giving us twice to friction area and hope to make them less prone to breaking.
Im not saying that the upgrade will work. As of now it just looks good in our heads untill we try it and see what happens. I know it won't shift like a corvette, but I can dream right.
We got my trans apart last night and it turns out I twisted the spines on the output. Anyone else ever heard of this?
Last edited: