WANTED: Banks twin ram

K

KTA-Cummins

Diesel Doctor
Joined
Jul 23, 2006
Messages
203
Interested in the air horn, plate, and heater spacers for a banks twin ram.
Thanks,
Brian
 
Good luck Brian. Joe Hellman makes a nice tube type similar to the twin ram if that's what you're after.
 
you can buy the ram separate from banks and just make your own plate out of some aluminum and take the heating grids out for some spacers.
 
Tell us what you are up to, and I'll tell you where to find one!:evil
 
I keep hearing this statement over again in my head.....(what does Dan Scheid run)

Jim
 
I think he plans on making some big power with some banks parts on old yeller.
 
Bersaglieri said:
I'll bite...what's he run?..I'm going to guess its the stocker.

-Dustin-
Click to expand...

Ran that for a long time! I couldn't tell you how many people asked me why I didn't run an aftermarket intake, or milled the manifold off the head ect......simple, cost verses gain.........it's not there, not even worth my time to build it in my eyes.

Jim
 
I want to do some testing to see how much it does even the flow out to the cylinders by watching the changes in individual cylinder egt's. I know flow wise it won't change much as I typically only see a 1psi drop from the horn to the plenum on the head. I am just looking to see if anyone had one laying around they weren't using so i could test it. I am not in dire need nor do I desire to pay $500 for a new one.
 
it has to drop the temps a little in the back couple of cylinders....
 
You must log in or register to reply here.
Top