water neck from ford cummins

[01quadcab]

Anyone have a picture of one?

I am looking for one like this but can't seem to get a part number.
http://gosperformance.com/blog/wp-content/gallery/jerrys-bronco/img_8482.jpg

 

[dustinjean]

I think the first gen 12v uses that style or might possibly be from a bus?

 

[ozone burner]

i know the 1990 first gens use one that goes up not identical to that one.

 

[01quadcab]

well I found the 90 setup and it's angled to the passenger fender. I can't seem to get a response from the company that did that motor

 

[roachie]

Its a cummins part, PM snedge

 

[01quadcab]

Its a cummins part, PM snedge

ok I will look him and up do that thanks.

 

[not enoughsmoke]

like this?

 

[not enoughsmoke]

 

[04fummins]

well I found the 90 setup and it's angled to the passenger fender. I can't seem to get a response from the company that did that motor

Aiden and Steel with GOS are great guys they're helping me with all the parts for my truck. but they are crazy busy so it may take them a bit to get back with you plus they are a cummins dealer so they can get you the parts you need.

what do you need this t-stat housing for? do you just need one that points straight up I have one off a med duty truck that points up but it does not have that type of alternator mounting on it.

 

[cliff-1972]

Here is what I did for my lower water neck.I cut off the straight and welded on a 2" 304L SS 90 degree elbow.I used silcone-bronze TIG rod to weld it to the cast iron.