JamieWood
Blowin' Smoke
- Joined
- Jul 29, 2006
- Messages
- 429
I put a 24v head on my 95; some time ago and I am just now getting around to this.
12v's are a one wire connection but on the 24v's they are two wire. How do I use the 24v sensor on my 95' wire harness?
I assumed that one wire was ground (black) and the other was the signal (tan). I hooked the wire from the loom to the tan wire and grounded the black. When warm the needle barely comes up.
12v's are a one wire connection but on the 24v's they are two wire. How do I use the 24v sensor on my 95' wire harness?
I assumed that one wire was ground (black) and the other was the signal (tan). I hooked the wire from the loom to the tan wire and grounded the black. When warm the needle barely comes up.