Wont start

C

ClayKann101

Zombie Hunter
Joined
Apr 27, 2009
Messages
971
Just got my hotrod pump back from Midwest Injection. They put new electronics on it I have everything hooked up, i get fuel thru my injector lines but it still wont start, not even a stumble. Any suggestions?
 
Any time I crack open anything from the tank to the head in the fuel system, I get air in there.... Instead of killing the starter, I spray the piss out of it.
 
I hope ether does the trick, i cranked on it for probably a hour or so before giving up.
 
Shot ether in it, it would run on maybe 3 or 4 cylinders then stop. Did it a few times and it still wouldnt hit all 6 and keep running. Im thinking its the injectors im pulling them right now and putting the stockers back in.
 
Clay just stick with a SO pump. You will like it better, I have a buddy with a HRVP and that thing acts up all the time.
 
just curious, are you throwing any codes? even tho its a "new" pump?
 
cumminalltheway said:
Clay just stick with a SO pump. You will like it better, I have a buddy with a HRVP and that thing acts up all the time.
Click to expand...
Mine has worked great til the electronics got shorted.

weazel said:
just curious, are you throwing any codes? even tho its a "new" pump?
Click to expand...

Nope i checked for that already. I guess tonight im going to put the "old" pump on and hopefully it starts. Im just getting sick of this.
 
first key way got smashed or whatever, 2nd keyway i go to put the pump in and it falls off. Now im not sure where it is, i barred the engine over and everything is smooth. I drained the oil and put a magnet up there to try and pull it out but nothing.

I really dont want to pull the front cover but im thinking its the best way to make sure its not around anything moving.

I just really need my truck next week.
 
Well it must have gone somewhere.....I wouldn't crank that over until you find out. Most times if it falls down in there you gotta take the bottom end apart to find it.
 
off the pump but you said your truck got slower when you put in your new injectors, maybr they are to big for what you have done. When i went from my 90's to 250's in my 06 it became alot slower. p.s. clay if you need help just call
 
You must log in or register to reply here.
Back
Top