WTB: Transmission mount for a 48re

You need one with two or three bolts going to the crossmember?
 
Cross member will be a custom piece. Will be going into a 05 1500 6.7 with the 48 re. Our chassis guy needs the mount to make the cross member. Need the entire mount honestly miller I didn't know one had a 2 bolt and another had a 3. I'll talk to him in the morning what do you have miller? Which design?

F8 pm sent
 
Transmission mount – 4 bolts into the trans case from the mount / 2 bolts from the rubber to the mount that attaches to the trans case / 2 bolts into the cross member.
 
Aren't they the same for the 48RE and 47RE?

The piece I am thinking of has 4 bolts that bolts to the OD housing, and then 2 bolts will bolt the rubber isolator to the OD mount, and then two bolts bolt it to the crossemember.

This is on a 2nd gen.

Basically if you have the pieces from a 47 they will work on the 48
 
did you want the stuff you had me take pics of? you were online since I replied to your last pm and sent the emailed pic to you. what I took pics of was exactly what you said you needed above.
 
You must log in or register to reply here.
Top