XRT Catalyst Full and defuel problem little help!!!

[Sancrest]

I have an 07 6.7 Dodge with the XRT. It has just decided to defuel and is saying catalyst full on the overhead. It was running just fine. Tried clearing the codes and everything. I even unhooked the batteries for over 10 minutes. Need some help. Here are the codes I'm getting.

P0513
P0532
P0106
P0487
U245C
U2141
P144E

 

[M_Thomas07]

P0513 INVALID SKIM/WIN KEY
P0532 A/C PRESSURE SENSOR CIRCUIT LOW
P0106 MANIFOLD ABSOLUTE PRESSURE SENSOR PERFORMANCE
P0487 EGR AIRFLOW THROTTLE CONTROL CIRCUIT A OPEN
U245C Can't find
U2141 Can't find
P144F EGR COOLER BYPASS STATUS LINE CIRCUIT HIGH

Set your truck completely back to stock. Update your xrt and reprogram. See if that helps.

Also try cleaning your map sensor.

 

[Sancrest]

Ok I cleaned the MAP sensor put the truck to stock cleared codes and made it 1/4 mile and same thing. Only code I pulled was P0106 (what causes this code). I can't update XRT because it is the older one.

 

[Scooter's Roofing]

unhooking the batteries won't do anything. if it's in limp mode, it has to see a starscan to get cleared out of it

 

[Sancrest]

Ok I think I found my problem. A boost line with a hole I can put 3 fingers in!

 

[TORK-STIK]

i have an older xrt and can update it from h&s. do you have the new software update from them. if not just send it to them for the update. there is a number that comes up on the screen when you plug it in, they have this info on their website.