Recent content by Ridemywideglide

Finally moving on from the 12v, and picked myself up a 2008 mega. It's not delivered yet, but in pics I can see that the EGR delete has been done, unknown about the exhaust as of yet. Guessing it must have some tune on it already as there were no CEL lights. Looking into the efi live, and I'd...

Fired up the '96 the other day and it died after about 10 minutes of idling.. Refired, died again after about 1 minute. Then started only trying to run on starter. Checked #9 fuse, good. Let it sit overnight, refired in the AM, and died after about 5 minutes. Unplug FSS connector and probe...

I've got a 241dhd from behind a 47re, and I need the input to put it behind the 47rh. Anyone got one laying around?

I've been running my Cummins swapped V10 since about March. Put it on the rollers in April (I think) and put down 418/967, on the HX35... Needless to say it's not loving life... Signature is not complete, so here's my specs. 5spd, 3:55's, 285/75/16 tires, 5x012 injectors from PDP, Seth tuned...

Doing a custom tank for an older WC truck, and I have a tank out of an 03 shortbed truck, but it came with nothing else.. Needing to find a sender basket for it, that will be run with Vulcan drawstraw. Pump working or not, or still in it or not does not matter, just needs to not be broken to...

I'll start by saying I don't generally work on anything newer than 2 gen 24v, so I'm a bit outta my depth here. I've got a 2005 5.9 that a buddy of mine has been getting the run-around on with a "diesel mechanic", to the tune of about $4500 Truck will not start without starter fluid. Runs like...

I've finally got the Cummins and NV4500 to swap in to my truck, and have some drive shaft questions.. It's currently a '96 V10 Auto 4x4 (dld), and I have a 5spd with a DHD to put in it.. Donor truck was a reg cab with 1 piece rear shaft, mine is eclb with 2 piece. No use to me, so I'm looking...

Looking to find a Ram v10 5spd flywheel. Hoping some of you guys out there have recycled a few v10's for the better... 2nd gen, part# says from '94 to 2000, Thanks Brad

Looking to find a p-pump 4BT for a customer project, and I'm hoping I can give someone here my money and avoid fleabay if at all possible. Something complete, running, mileage really not much concern, but need a solid runner. ridgwayrods@gmail.com Thanks Brad

Needing an 01 or 02 24v 6spd ECM.. Thanks Brad

Working on a 24v for a customer, even tho I'm not a diesel shop, I do have some experience with the 12v's that I've owned. Customer decided APPS was out, quick scan showed P0122, so he ordered a APPS from Geno's. put it in and it's the same issue. Starts fine, no throttle response. If I put...

Hey guys, I'm looking for a quick answer/refresher on timing these things. I've only done my own once and that was a few years ago. So I've got a guage on the piston for tdc, and the snapon timing tool in the pump, I get 5.1 total lift on the pump from the time it starts to move, and the time...

I've been tasked with putting together a 12v package for a customer since I'm the only guy at work thats owned one and need some opinions. 97 12v auto. Young guy wants a DD/weekend hotrod. Has been set on dragon flow r1's (100hp is all they state) and an Aurora 3000 turbo. I'venot read much...

Hey guys, I dumped my other truck about a year ago, and have been driving a half ton eddie bower and can't take it anymore. I'm looking at buying a reasonably clean V10 and swapping... Here's where I need some guidance from all you helpful gent's as you did when I rebuilt the other one. If I...

I think my lift pump sh!t the bed last week. It usually runs around 35psi at idle and it can't hold 20 now. There was a large puddle of fuel last I had it running, that I could only trace back to the l/p. Is there a weep hole on them that leaks when they go out? Guess after 280k it decided to...