tylerltr450
Wanna Be Hacker
- Joined
- Aug 2, 2014
- Messages
- 189
Im pretty sure anything over 25 deg on a 5.9 you can lift the head tho. I know the 6.7s can take much more timing then the 5.9s
Whats the highest deg can you run with the limiters turned of and not lift the heads on a stock motor besides go go sticks
You're saying without studs right? I've seen guys around 32 and still daily driving it no problem. Most have H11's or 625's though.
Great work getting the EFILive Library going though!
You're saying without studs right? I've seen guys around 32 and still daily driving it no problem. Most have H11's or 625's though.
Great work getting the EFILive Library going though!
So are the studded guys just throwing studs on their 200,000+ mile stock headgasket and holding them down fine? I figured if I popped mine then I can work on the head and afterwards do studs, but I it helped I might just put studs in now.
Yeah you make a good point, I really only considered changing springs decking and studs if I popped it... I didn't know if the consensus was that the old gasket was going hold better then a new one or not. I'll probably put studs in.
Think stock bolts are going to hold with 25° 50 hp injectors 2900 uS and 40 lbs of boost?