Panther 95
New member
- Joined
- Nov 25, 2012
- Messages
- 18
Have a Same Panther 95 tractor for pulling fitted with a 6 cylinder 6ltr 3 valve engine max rpm is 2700. (Can go to 3000rpm)
Planning on putting a Holset HX55 turbo with 71mm inlet, 80mmexhaust, 28cm2 turbine housing to it. Hoping to get 45psi boost minimal.
Last year whe put a P7100 on it,made a gearbox for because Same doens't have any driveline for it. Bored the nozzle's to 0.015 my self and made return holes on the injector because Same don't use return lines.
Else they would open at 700bar(10.000PSI+),now just 180bar(2610PSI).
Whe tested it with a waterbrake at 325HP, only the PTO broke. So we don't know how much more it was :gag:
Pump is a PE6P120A320RS7428. with RQV
This year it's getting 2418455152 Flat top - performance 13mm plungers And Governer conferted to RQ.
Panther 95
Planning on putting a Holset HX55 turbo with 71mm inlet, 80mmexhaust, 28cm2 turbine housing to it. Hoping to get 45psi boost minimal.
Last year whe put a P7100 on it,made a gearbox for because Same doens't have any driveline for it. Bored the nozzle's to 0.015 my self and made return holes on the injector because Same don't use return lines.
Else they would open at 700bar(10.000PSI+),now just 180bar(2610PSI).
Whe tested it with a waterbrake at 325HP, only the PTO broke. So we don't know how much more it was :gag:
Pump is a PE6P120A320RS7428. with RQV
This year it's getting 2418455152 Flat top - performance 13mm plungers And Governer conferted to RQ.
Panther 95
Last edited: