BC847
Member
- Joined
- May 14, 2006
- Messages
- 851
I've had the Performax gauge system in my heap for some time. Such included the earlier data-logger widget.
Been up to no good under the hood lately and needed to update/upgrade the stuff. Specificaly the data-logger as the latest included tach and speedo.
Anyhoo . . . I run a Trans Temp, Fuel Pressure, Boost (at the intake log), and EGT gauges on the dash, and a tach on the steering column.
An older pic . . .
In addition to those gauges and related sensors listed above, I also run sensors for Back-Pressure (AKA: Drive-Pressure), Primary output, Secondary output, and Charge-air temp (at the intake-log) for tuning purposes.
Back-Pressure sensor . . .
Primary output . . . .
Secondary output . . .
Intake-log . . .
And Charge-air temp . .
They all play into the processor (temporary install here) . .
Got the data-logger right there on the heater-box next to the gas pedal. Just plug in the flash-drive and dance . . .
It shows me what I think I need to see. Still have a number of unused inputs that can easily be renamed as needed.
Thanks to Michael @ ISSPRO for the tech-support. Apparently, if one inadvertently interchanges the tach and speedo plugs, . . . . well, . . . . . "Stupid In, Stupid Out". :doh:
Been up to no good under the hood lately and needed to update/upgrade the stuff. Specificaly the data-logger as the latest included tach and speedo.
Anyhoo . . . I run a Trans Temp, Fuel Pressure, Boost (at the intake log), and EGT gauges on the dash, and a tach on the steering column.
An older pic . . .
![dash_zpsdjcpvx21.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/1993%20W250%20CTD/dash_zpsdjcpvx21.jpg)
In addition to those gauges and related sensors listed above, I also run sensors for Back-Pressure (AKA: Drive-Pressure), Primary output, Secondary output, and Charge-air temp (at the intake-log) for tuning purposes.
Back-Pressure sensor . . .
![Drive_zpsttrwerx8.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/Drive_zpsttrwerx8.jpg)
Primary output . . . .
![Primary_zpsdqknwjsh.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/Primary_zpsdqknwjsh.jpg)
Secondary output . . .
![Secondary_zpsnxc0xnrs.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/Secondary_zpsnxc0xnrs.jpg)
Intake-log . . .
![Boost-Pressure_zps5beoyl6q.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/Boost-Pressure_zps5beoyl6q.jpg)
And Charge-air temp . .
![CA-Temperature_zpsnwtzwebi.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/CA-Temperature_zpsnwtzwebi.jpg)
They all play into the processor (temporary install here) . .
![Processor_zpshidlmymf.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/Processor_zpshidlmymf.jpg)
Got the data-logger right there on the heater-box next to the gas pedal. Just plug in the flash-drive and dance . . .
![logger_zpssnixpzw5.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/logger_zpssnixpzw5.jpg)
It shows me what I think I need to see. Still have a number of unused inputs that can easily be renamed as needed.
![Working-DATA-logger_zpst79fsbnl.jpg](http://i169.photobucket.com/albums/u237/BuiesCreek847/Triples/Working-DATA-logger_zpst79fsbnl.jpg)
Thanks to Michael @ ISSPRO for the tech-support. Apparently, if one inadvertently interchanges the tach and speedo plugs, . . . . well, . . . . . "Stupid In, Stupid Out". :doh:
Last edited: