madmikeismad
So mad
Wow I go back and look at some of the posts I've made here, and realize I need to get more sleep. I don't know what I was thinking for half of them.
Wow I go back and look at some of the posts I've made here, and realize I need to get more sleep. I don't know what I was thinking for half of them.
Wow I go back and look at some of the posts I've made here, and realize I need to get more sleep. I don't know what I was thinking for half of them.
IIRC, he made over 5 complete passes all the way around the tube. It will be the only part of the truck that survives the crusher at the end of its life.
Well don't go through the rest of your threads then. :hehe:
LOL it happens sometimes....now I wonder if I can trust your use of a tape measure...
Sorry no help with that, but I will say that 1 month later you got it back together! Congrats!
Sorry. I should have sent my 3/4 to 1/2 adapter with it. You need to preload it to 160ft/lbs while spinning it then back off 1/8 turn.....or go by feel. It will be fine. LOL
Sorry. I should have sent my 3/4 to 1/2 adapter with it. You need to preload it to 160ft/lbs while spinning it then back off 1/8 turn.....or go by feel. It will be fine. LOL
tight and back off a little should be just fine ...... i have never set bearing with a torque wrench .... I work on charter buses , never had a failure .... 5 yrs in heavy diesel ... no failures ..... dont be afraid of them .....they actually run fairly cool .... make sure your diff vent is clear and make sure when you get the axle in .... tip the housing up at either end to fill the hubs ( about 10 min. per side works good ) ... then level it out and check fluid after 10 min .... kinda of a pain ... i use this time to clean and pick up tools and such...... LOL
That little adapter is worth it's weight in gold...
that works but you may end up with it too full and having a leaky wheel seal ...... that defeats the pourpous completly at that point .......my $0 .02
I'm ok with a slight leak, easy fix. And I was only talking about a little bit, not a whole gallon LOL
Are you working this weekend?
LOL... yeah concedering 1 gallon is the whole diff ......... that would be real smart..LOL
Yup, but I work nights, so I can be up all day.
Earlier on this page you said you need to sleep more. Idiot.
Yeah, but I don't pass up oppurtunities for visits from friends. Thats why my road trips are so exhausting.
On a totally different note, do any of y'all know how I have any friends?
Because your internet persona is just a facade LOL