2007 half ton cummins.
- Thread starter Derekp
- Start date
I haven't dynoed her yet but I will soon.
Red Sleeper
Active member
What's up with the paint texture?
Did you have bed liner sprayed in color on the truck?
Also, do all the gauges work?
Did you have bed liner sprayed in color on the truck?
Also, do all the gauges work?
Yes it is rhino lined in uv resistant blue, so yes it has a texture. All the stock cluster gauges work with except for the tach because the motor did not come with one from the factory. I'll have it working here soon though. There are also 8 different gauges as well to monitor everything.
95cummins5.9
Old man ***** gossiper
What Engine Mounts ended Up Working.
I used the old 1st Gen style at a 45 degree but I bought new ones. I welded a piece of 1/4" metal into each of the trucks oem motor mounts once I figured out how I wanted the motor to sit. Then just drilled for the bolt and bolted it up.
Fiberglass. I actually got it off of craigslist. Some guy had it made for his truck and then he wrecked it before he could put it on. I just got lucky.
What year is the scsb?
Okay. This is the thread you need. He did exactly what you want to do in an 03 scsb. It also helped me a bit on what I needed to do to my 07.
Grocery Getter - 2003 Ram 1500 RCSB 12v/auto swap - Dodge Cummins Diesel Forum
maxwedgehead
Member
Id say cheapness
oke:on another note, is this 4 door half ton 4x4? and is it functional?
Bought a donor truck and it came with the motor. It'll get a ppump swap in the future.
Id say cheapness
on another note, is this 4 door half ton 4x4? and is it functional?
No its 2wd. I have straight axles off of an 08 f250 4x4 that I'm going to swap in later. It will also get an 8" BDS long arm lift. One thing at a time though. The motor swap was expensive after needed to fix the head gasket, deck it, stud it, and buy new injectors. Lol
maxwedgehead
Member
If its gonna have 3/4 suspension under it then, why not just go buy a nice 3/4 oem diesel truck?