dual feed gone wrong. FML

for the bling bling yo, fo shizzle be supplyinz dat cool fuel to da pump
 
I prefer a fuel supply system that got balls. If you can not maintain 40 psi at full power and rpm dual feed is only a band-aid.
 
BgBlDodge said:
Ya. I'm an idiot. Forgot I was in the 12v forum. Stupid beer. :nail::eek:wned:
Click to expand...

Do you drink "make you Stupid beer" when you work on your truck? Maybe that's why your truck became the Dyno Jester and contracted BBS.....

:hehe:
 
Big Blue24 said:
Do you drink "make you Stupid beer" when you work on your truck? Maybe that's why your truck became the Dyno Jester and contracted BBS.....

:hehe:
Click to expand...

I wish but when I wrench I drink "leave the gas can and match alone" beer LOL
 
dieselmann97 said:
is this dual feed really worth it?? this is the first i've ever heard of this what are the pros & cons?
Click to expand...

Depends on the configuration of the fuel system but there is a gain to be had, worked good on my 98 when i did it about 900 years ago but on the 01' 12V I have an Airdog 200 going into the stock port.

Heat is your friend on almost all stuck bolts, caps or fittings.

Jim
 
i never knew the #6 barrel was at the front of the pump

*thats whats so great about these forums....learn something new every day! :)
 
Last edited:
Haha I think he was being sarcastic because we all kept talking about the number 6 plunger getting fuel.
 
anyone know that the threads are for the facotry bajo plug on the side and the plug in the front? i need to order them as well as fuel line and a "Y". local hose store didnt have any.
 
The front is m18x1.5 with the helicoil in place and the side is m12x1.5.
 
so where would be the best place to order them from? just use them demensions and look for a m18x1.5 45* push loc bend and a straight push loc m12x1.5?
 
TRUBBS said:
so where would be the best place to order them from? just use them demensions and look for a m18x1.5 45* push loc bend and a straight push loc m12x1.5?
Click to expand...
Summit is where I would order from.

Male 14mx1.5 to -6 or -8an male

Male 18mx1.5 to same as above

A tee in -6 or -8an

You will also need female -an to whatever size hose push lock.


Or you could just order one from rob^
 
bsmith said:
Side is 14mm. Vp is 12mm
Click to expand...

Correct, I thought he meant the return banjo.

I use a straight into the side and 90 into the front port.

CIMG0315-1.jpg
 
Last edited:
You must log in or register to reply here.
Back
Top