12vCumminsFTW
Active member
- Joined
- Dec 9, 2010
- Messages
- 1,377
Ok, so I've been kicking around the idea of building a twin setup using the 66 I already have. I'm getting a spool flange for it, which I hope will make it spool pretty fast. Got a steed speed straight flange manifold, it puts the turbo pretty high up, I think if I move the heat exchanger there would be plenty of room for a primary under it.
Anyway, I'm wondering what would be a good primary to run? If I do this its gonna be kinda on a budget. I also want the overall boost to be as low as possible, as I don't have o-rings. I was thinking maybe a s475, 78, or 80 with the 96 turbine and 1.32 t6 housing. Not sure if I would need a gate or not?
Any input would be appreciated.
Anyway, I'm wondering what would be a good primary to run? If I do this its gonna be kinda on a budget. I also want the overall boost to be as low as possible, as I don't have o-rings. I was thinking maybe a s475, 78, or 80 with the 96 turbine and 1.32 t6 housing. Not sure if I would need a gate or not?
Any input would be appreciated.