Truckers, lets see your rigs!

Maybe one day this damn junk will quit finding me.
 

Attachments

  • 1471BAD7-BC8D-42AD-931A-445CF061FB2B.jpg
    1471BAD7-BC8D-42AD-931A-445CF061FB2B.jpg
    386.5 KB · Views: 0
Would a ceramic ball bearing turbo even live in a diesel application?

I'm doing more gasoline tuning now and one customer wants to buy a "pro mod" turbo from precision.
 
allan5oh said:
Would a ceramic ball bearing turbo even live in a diesel application?

I'm doing more gasoline tuning now and one customer wants to buy a "pro mod" turbo from precision.
Click to expand...
Why would it not?

Sent from my SM-G955W using Tapatalk
 
They do not do well in diesel applications. Ask an SDP Cat owner or an LEE Cat owner how they work out. The need for them isn't there. The misconception that they spool quicker is why people use them at all. Turbochargers are one of the only applications where somebody thought ball bearings and 100,000 RPM was a good idea. Every other high speed application uses things like air foil bearings or oil supported bearings (ie journal bearings found in turbochargers). Ball bearings are used in some very very small applications that spin that fast but nothing as large as the bearings used in turbochargers. The larger the bearing the high the surface speed is on the ball to maintain a given RPM.
 
A little rooftop AC repair.
32fb31f26d943019c78a7dbba5d1daa3.jpg
83b2047d910ca8cada1f87d382e82aff.jpg
7e199f9b1484b35412b0b6fed987afa9.jpg


Sent from my XT1575 using Tapatalk
 
SmokinCAT said:
The dyno gave false readings on doodles run because it takes gear ratio into account and become part of its calulation, so when a parameter is changed on the truck and not in dyno software it gives higher numbers.

Truck engine dyno test are done by hold truck at 55-60mph and then load is slowly increased, for a dyno day this would be stupidly time consuming.

Your theory is busted when the current HP per discplacent record at Antrim’s was done with 4.17 gears...
Click to expand...

Dynos dont care about gear ratio, they measure their own roller speed and braking torque and calculate power from that.

There is still rotational inertia forces with 4.17 gears, just not that much than faster gears.
 
i-r-truckdriver said:
If I understand correctly, A-class is too much competition and B-class isn't enough? Why don't you enter b-class to show the world how superior vulva is?:poke:
Click to expand...
I wanted to do something I havent already done and my "sponsor" said A-class or nothing but we thought they must still use original type fuel system.

Not going to spend 6500 euros for shipping normal working truck there and back to compete in class no one is interested.
 
jfaulkner said:
Don't your super powerful euro trucks already have common rail? This shouldn't be an issue especially with your super euro tuners. Anyone converting to common rail are doing it on "old dinosaur" US engines so you should be walking in with the advantage. So pony up or shut up.


These are new trucks that are identical to the ones with the euro engines. a 2012 with a Maxxforce or a Paccar are the same trucks as the ones with a Cummins however the cummins powered truck always brings more money.
Click to expand...
New trucks have commonrails, too expensive to buy one and build as a useless hobby truck.

Cummins brings more money because truckers are still idiots. Maxxforce is **** anyway. Buy trucks with Volvo engines.
 
Leiffi said:
Dynos dont care about gear ratio, they measure their own roller speed and braking torque and calculate power from that.

There is still rotational inertia forces with 4.17 gears, just not that much than faster gears.
Click to expand...

Bull****, the people that have seen the the programming for the Taylor dyno say other wise, but since you own one you know all of course.

Swear you are getting dumber by the day.
 
SmokinCAT said:
Bull****, the people that have seen the the programming for the Taylor dyno say other wise, but since you own one you know all of course.

Swear you are getting dumber by the day.
Click to expand...
All dynos are same.

Why is it that only heavy dynos (in USA) use that pull down test ? Cars, pick-ups, engine dynos always accelerate, free or controlled, or do steady state at different points.
 
i-r-truckdriver said:
If I understand correctly, A-class is too much competition and B-class isn't enough? Why don't you enter b-class to show the world how superior vulva is?:poke:
Click to expand...

Volvo is not allowed, limit is 16 litres and Volvo is 16,1 , and if I race with working truck, it will be modern truck and that means commonrail, commonrail is not allowed in B-class.
 
Leiffi said:
All dynos are same.

Why is it that only heavy dynos (in USA) use that pull down test ? Cars, pick-ups, engine dynos always accelerate, free or controlled, or do steady state at different points.
Click to expand...

No, not all dynamometers are the same. I have not seem very many engine dynos accelerate....Most I've ever seen are pull down. I use Pull down for testing tractors. The only thing that accelerates are the smaller chassis dynos...and in most cases there the drums outweigh the vehicle using the dyno.


You keep on being wrong...

Chris
 
Signature600 said:
No, not all dynamometers are the same. I have not seem very many engine dynos accelerate....Most I've ever seen are pull down. I use Pull down for testing tractors. The only thing that accelerates are the smaller chassis dynos...and in most cases there the drums outweigh the vehicle using the dyno.


You keep on being wrong...

Chris
Click to expand...
All dynos with brake are the same, torque transducer and roller speed is all you need to get horsepower numbers. Dont even need engine rpm, you only need it to get engine torque.

Inertia dynos calculate from roller mass and speed/acceleration rate.

You dyno tractors at steady rpm, just start from high rpm, isnt that what you said earlier ?

Dyno Pulls Pro Mod Engine Test Rage Fuel Systems Drag Racing Video - YouTube
 
Leiffi said:
All dynos with brake are the same, torque transducer and roller speed is all you need to get horsepower numbers. Dont even need engine rpm, you only need it to get engine torque.

Inertia dynos calculate from roller mass and speed/acceleration rate.

You dyno tractors at steady rpm, just start from high rpm, isnt that what you said earlier ?

Dyno Pulls Pro Mod Engine Test Rage Fuel Systems Drag Racing Video - YouTube
Click to expand...

Start at high RPM and pull down to rated RPM. We don't accelerate...

You said "All dynos are the same"

You didn't specify, you made a broad statement.


Chris
 
You must log in or register to reply here.
Back
Top