Recent content by drewkeen

Bought a wrecked truck to use as an engine donor. Frame was bent and cab was bent up so it was trash. When I pulled the head off today I saw that it had some Mahle 0.020 over Pistons in it. I attached a picture but couldn't find any info with the numbers. Is this just A stock replacement...

Posting this up for a friend that works more on European diesels. Here is what he sent me. He tried to post this on Ebay and they pulled it so that is why it is written the way it is. Let me know if you have any questions I can answer or I can send over his contact info. Didn't want to...

I removed this and went to a compound kit and a bigger fuel setup in the quest for more power. Kit was a great power upgrade has less than 10k miles on it. Kit is complete from the S&B air filter to the HX40 downpipe. It Includes: S364.5 SXE Turbo ATS 3-Piece 2nd gen Style Manifold S&B Air...

Looking for some info on the Duramax injectors. I have an engine I am trying to modify with a similar looking Bosch fuel system and after some searching I still have a few questions I can't find an answer to. What is the stock LBZ spray angle? Do aftermarket nozzles usually retain this? Do all...

2003 Dodge with the 5.9 HO and 48RE transmission. Nothing has recently changed to cause this, the truck did not do this when I first bought it. It got a Smarty tune and did this. I then flashed it back to stock and reflashed the Smarty and it fixed the issue. I should have left well enough...

I removed this and went to a compound kit and a bigger fuel setup in the quest for more power. Kit was a great power upgrade has less than 10k miles on it. Kit is complete from the S&B air filter to the HX40 downpipe. It was $2400 new with a cheap box S400 turbo. I have upgraded the turbo to...

I have a set of stock injectors from my 2003 HO truck. These were running great in the truck when I removed them to install some performance injectors. Truck has always ran Baldwin filters and had 248k miles on it when they were removed. These would be ideal for someone with some failing...

I removed this and went to a compound kit and a bigger fuel setup in the quest for more power. Kit was a great power upgrade has less than 10k miles on it. Kit is complete from the S&B air filter to the HX40 downpipe. It was $2400 new with a cheap box S400 turbo. I have upgraded the turbo to...

These were from a clean running engine. I used a different set for cores and kept these in my engine before swapping in 100% over injectors. These will be shipped using the protective covers my new injectors came with to keep out debris. $600 shipped

I removed this and went to a compound kit and a bigger fuel setup in the quest for more power. Kit was a great power upgrade has less than 10k miles on it. I was running this with a S369 Sxe on my truck and a friend wanted to try it out over his S364.5 Sxe on a 12v truck. I mention this because...

I removed this and went to a compound kit and a bigger fuel setup in the quest for more power. Kit was a great power upgrade has less than 10k miles on it. I was running this with a S369 Sxe on my truck and a friend wanted to try it out over his S364.5 Sxe on a 12v truck. I mention this...

These are very hard to find and allow 4th gen laramie seats to bolt directly in your 3rd gen. No modifications required unlike with the crew cab seats that have to be cut and welded and even then still take away room from rear passengers. These are 60/40 split and folding. $550

I need one of these pictured below to give me a bit more clearance to the turbo. Any ideas where to get one? ATS made it originally but they want $20 for shipping and thats silly on a tiny part.

I need one of these, I know someone has to have one laying around.

I bought one of these and it turns out they left it on my pump. This is a brand new bracket from Dodge. I paid $45 for it, I'll take $25 shipped so its not just sitting here. MOPAR Part #68100252AA A bit more info - this can be used on 03-08 trucks to upgrade to the improved power steering...