Recent content by wwm

I was wondering what you guy were doing when y'alls steering wheels started to rip and tear. I don't want to go with a steering wheel cover and don't wanna pay 300 from carid. Let me know what y'all did?

I have a couple of parts off my 2006 cummins. HE351CW turbo with 120k miles on it. 300 Stock intake horn Stock exhaust manifold with egt port Stock air box and tubing Pre intercooler pipe. Headlight housing. Alittle scratched and faded, the driver side has a crack on the bottom. Make...

I was wondering if some people have done just the bulb replacement in the stock headlight. I don't want to run HID lights because I hear they flicker. I some of y'all shine a light on this topic. Picture will be greatly appreciated and the pros and cons of running them. Thanks in advance

0-100 boost $65 And 0-100 electronic exhaust back pressure ( no exhaust in the cab) $215 Shipped if sold together.

Well here are the pictures of the Twin setup s362fmw over s480 Specs are 62fmw/68/.91ar T4 over an 80/96/1.32ar T6 then a Tial 44mm gate dumping to hotpipe. :st: Setup will spool at 20psi @ 1600 rpms in OD easing into it. Setup hit 80psi for about 5 seconds before blowing off a boot...

I am new to EFI Live and would love to learn some basics with the tuning tables. I know that there are tuner out there that do it all for you but i just wanna learn for myself, and tinker with it myslef. Does anyone have any tutorial videos of the tuning and changing tables? I know that there...

My dad has the opportunity to buy and 2008 ford 6.4 with a blown motor at a great price, he was wondering what all is going to requires to make a 12v cummins work. I know destroked has all the parts but is everything needed in that kit for $5600 Also has anybody ran into any problems doing this

I was wondering what the most others have made with a stock he351. I dynoed on a dynojet made 558/1188 Stock air box and filter and stock he351 Plenty of fuel and box tune

My twin turbo kit is in the process of being built, so I am looking at about 1 month to 1.5 months before I can get the twin turbo setup on the truck, before its built and painted. I was thinking about running a used 66mm-72mm turbo for the meantiime and sell it once my twins are in and I like...

I am selling my stock injectors out of my truck, they have 135k miles. They are still on the truck and will be pulled at the time of sell. I am wanting to get $1,000 for them.

I am building a twin setup with a non-wastegated 62/68/.91 over an 80/96/1.32 and external wastegate. I am wanting to do an angled up manifold flange with the wastegate port on top as well from steed speed. My question is will my turbo setup have enough room between the turbo and the valve...

I am fixing to install a Fass 150 on my truck 2006 dodge. The kit came with the bulkhead and draw straw. Should I just use that or buy a sump. I understand that the sump you don't have to drop the tank, but I need to drop the tank because the shield is falling Down. Are there any problems...

I am ordering all my part for a truck biuld. truck is a 2006 cummins qcsb, thuren 2 inch lift, 33.5" tires ATP EFI v2 tuned by Rob, dual cp3s, flux 4s(200 hp injectors), twins 63/80, and other supporting mods. On my trans is it worth the extra $$$$ 900-1000 for the billet intermediate shaft...

I bought those for my biuld but just decided to buy ARP 625 instead. These are still in original box, but like I said I just ended up buying arp 625 just to be on the safe side. I will do $425 shipped, paypal only sent as a gift or pay 3% fee. thanks

I have a 2006 dodge and my steering wheel has gone to crap at the top where I rest my hands alot has now worn through to the white plastic. I want to get it replaced but don't want to spend the money on it yet. What steering wheel cover are y'all going to that are slim and will hold up, I hate...