DieselNasty
New member
What can I do to crank this little thing up? Im going to be using it in a little pulling tractor and wanted to see if I could get any tips before I tear into it.
Thanks
Thanks
To turn the pump u on it u need to remove the injector lines and remove the bolts around the plungers on top and pull the assembly out and it should have shims that shim the plunger assembly to the pump case and the more shims u take out the farther down the plungers sit in terms turnin the pump up don't know how many to take out just have to play with it be sure to line ur pump rack back up when reinstallin and that should do what ur wantin to do
Wow guys freakin awesome! The frame I am putting this in is a 1973 Homelite T-15 which is a good ol beefy steel frame. Im going to stretch the front a little for the diesel to fit since it has an old cast iron B&S 15hp easy spin 1cyl on it. The engine should bolt up pefect because this is out of a full hydrostat mower with a burned up trans. The T-15 is also hydrostat:bang so the driveshft from the old 15 hp will get bolted to where the old shaft went on the diesel. I expect to have some tranny problems tho!