Big Blue24
Comp Diesel Sponsor
- Joined
- Jan 5, 2008
- Messages
- 6,310
These girls are ready to mount to the chassis, then headers soon to follow...
Sent from my iPhone using Tapatalk
In the pictures, those look like composite 90* quick connect air fittings on the compressor covers, we melted one mounted in the same fashion on the dyno just the other day. I strongly recommend you pull your boost reference from the cold side of the charge air cooler if you plan to use composite fittings... unless those Precision units only run at a fairly low compression ratio where air temp stays below 250* or so...
Definitely a no go when boost hit 50+ psi on our setup, about the 3rd or 4th dyno pull and fitting melted and blew apart.