Going to run the truck tomorrow!!!!! with new motor

well I'm super stoked!!! Broke the trans first pass bout 250ft and coasted 12.7 @ 71mph lol gonna get it back togather this week and get back out there.
 
JQmile said:
Did you fix your top end fueling issues?
Click to expand...

think so hard to tell I only went full power to 250-300ft lol..

next week I'm moving to my new shop bought a superflow dyno so I'll be testing everything out on that to as well the tracks
 
DMS1707 said:
thanks!!! I can't find the rule on transmission blanket when your supposed to have one do have any idea? and the rci universal doesn't really fit well...thanks
Click to expand...
These are from the NHRA rule book. Not sure if this is what you were looking for or not.
2:14 TRANSMISSION, AUTOMATIC
Any non-OEM floor-mounted automatic-transmission shifter must
be equipped with a spring-loaded positive reverse lockout device to
prevent the shifter from accidentally being put into reverse gear.
Functional neutral safety switch mandatory. All transmission lines
must be metallic or high-pressure-type hose. All vehicles running
quicker than 10.99 seconds or faster than 135 mph and using an
automatic transmission must be equipped with a transmission
shield meeting SFI Spec 4.1 and labeled accordingly. (Blanket-type
shield, appropriately labeled as meeting SFI Spec 4.1, permitted.)
All non-blanket-type shields must incorporate two (or one, per
manufacturer’s instructions) 3/4" x 1/8" straps that bolt to the shield
on each side and pass under the transmission pan, or
transmission pan must be labeled as meeting SFI Spec 4.1.
Permitted in all classes where an automatic transmission is used.
 
jessmeistertc said:
These are from the NHRA rule book. Not sure if this is what you were looking for or not.
2:14 TRANSMISSION, AUTOMATIC
Any non-OEM floor-mounted automatic-transmission shifter must
be equipped with a spring-loaded positive reverse lockout device to
prevent the shifter from accidentally being put into reverse gear.
Functional neutral safety switch mandatory. All transmission lines
must be metallic or high-pressure-type hose. All vehicles running
quicker than 10.99 seconds or faster than 135 mph and using an
automatic transmission must be equipped with a transmission
shield meeting SFI Spec 4.1 and labeled accordingly. (Blanket-type
shield, appropriately labeled as meeting SFI Spec 4.1, permitted.)
All non-blanket-type shields must incorporate two (or one, per
manufacturer’s instructions) 3/4" x 1/8" straps that bolt to the shield
on each side and pass under the transmission pan, or
transmission pan must be labeled as meeting SFI Spec 4.1.
Permitted in all classes where an automatic transmission is used.
Click to expand...
Thank you for the info!!!
 
You must log in or register to reply here.
Back
Top