Made this several years ago. Made many people wonder where my NOS was hiding. Gutted stock fuel filter housing and stuck in a two stage system running off boost switches. Had a .093 1st stage and a .125 second stage. Gutted heater grid and tapped it for the jets. Covered lines with wire loom and put battery boots on the ends so they looked like the wires for the heater grid. Used the body of the canister for the ground and used the factory wiring harness which I cut and spliced into for the hot power for the solenoids. Worked awsome and was steath too. Easy to remove also. Switch out heater grid with a good one and remove housing by taking off wire connection and the two bolts on the side of the head. Now only if I could hide a 15lb bottle under the valve cover!
Attachments
Last edited: