Recent content by ILLINOISRAM

  1. ILLINOISRAM

    Scheid 2.6 pulling turbo

    Scheid built 2.6 S475 turbo. PPL protrusion spec billet wheel and nut. 88/96 turbine wheel with 1.32 t6 housing. Ran 38-42 lbs of boost at 12-1300*egts. 1200$ shipped. Had Smokem build me a bigger one is why I took it off.
  2. ILLINOISRAM

    Scheid 24v runner intake manifold

    I bought this from Brad used at effingham. Diceded not to use it cause if I'm gonna go that far im gonna do a Hamilton head. So just pass this along to somebody else. 1600$ new 1100$.
  3. ILLINOISRAM

    8x11 24v injectors

    I have a set of 8x11 vco nozzles that were put in a guys truck new. He thought they were too smokey so we took them out after a couple thousand miles, had them cleaned and sealed back up in shrinkrap. They are currently with Smokem getting rechecked and measured cause they have been sitting for...
  4. ILLINOISRAM

    2005 qclb sport Laramie dually

    I'm putting my truck up for sale. It is a 2005 5.9 cummins quad can long bed dually. It is a Laramie sport with black leather interior. It has the nv5600 manual Trans and 132000 miles. It is all stock except for a 4" AFE turbo back exhaust with muffler. About 8000 miles on Firestone transforce...
  5. ILLINOISRAM

    First hook of the year for me. Updated setup

    Well since CompD is a whole lotta crap and not a lot of competition anymore I thought I would post this video to steer it back in the right direction. Lol anyway over the winter I put a Schied mechanical fuel system, water to air cooler with a front weight box/ ice box setup. Nothing major for...
  6. ILLINOISRAM

    PPE hot+2

    I have this programmer that we took off of a 08 Duramax. Works great. No case. 450$
  7. ILLINOISRAM

    Scheid 2.6 protrusion charger

    This is a Scheid built s400 turbo. It has a billet wheel clipped for 2.6 protrusion. Vband outlet compressor cover. 88/96 turbine wheel. A 1.32 t6 housing. Has about ten hooks on it. I bought it new. Wanting to go to a hx60 setup is the reason for sale. I paid 1950$ Asking 1750$. Pictures are...
  8. ILLINOISRAM

    6x18 JL 24v injectors

    I have a set of JL injectors that i bought before John passed. They are a mack 6 hole nozzle that he opened up to 18 thousandth and the spray angle was tightened up to run 30-35* timing. The fuel feed passages have been increased in size also. Since you dont dual feed a 24v this was what he...
  9. ILLINOISRAM

    Wanting some opinions

    Here is my last two hooks from Sunday. I have some questions but curious to opinions before we dive in. Here is first hook. Rolled first puller and got the option to drop. I dropped this one http://i384.photobucket.com/albums/oo289/ILLINOISRAM/9c513ac8.mp4 Second hook five trucks between so...
  10. ILLINOISRAM

    6 mastercraft courser m/t tires

    I have 6 tires i kept off of my old dually when i sold it and my new truck has 17'' rims so i am going to sell these. The front two tires are 305/70/16 for running a wide single wheel rim on front and the back 4 are 285/75/16. They are all about 50% tread or so. These are tires only. they...
  11. ILLINOISRAM

    24v springs keepers and retainers

    Hey guys i have some 24v springs, chromoly retainers and 10* locks for sale. They come off of my head. The springs are 120lb seat pressure when installed at the 1.380 install height. They are 260lb on the nose at 1.000 and still not coil bound. I changed to all Hamilton valvetrain just because i...
  12. ILLINOISRAM

    Cummins superduty swap. F550

    I have a customer that has a 2000 F550 XL zf6 trans and he is interested in doing the conversion. My question is one everything iv read so far is about f250-f350 trucks. Is the 550 the exact same dimensions with the motor mounts, frame width, crossmember size all the same? The reason I ask is a...
  13. ILLINOISRAM

    New motor build for the puller

    Well I started the build process for the new motor. Y'all know that my last setup broke the cam and bent some valves. It had stock so pistons. So anyway I started off with cam research and contacted Hamilton Zach was super good to deal with and set me up with one of his new steel cams with the...
  14. ILLINOISRAM

    Pulling video (I have some questions)

    I pulled my truck this past sunday and now it wont start.:kick: Any ideas? LOL This was the first pull in the 2.6 class http://www.youtube.com/watch?v=DfeuYRxtqgM&feature=related
  15. ILLINOISRAM

    Two more hooks this weekend

    Me and Jones (BLACKSTROKER) hooked twice this weekend. Friday night in Rankin IL and then saturday in Cerro Gordo Il. Friday was a good hook but sat. it started misting about 10 min before we got to go so the track got pretty slick on top and had trouble getting traction on the start. Once the...
Back
Top