Recent content by oldblue116

I just picked up a 1998 rcsb 1500 2wd that I'm going to be dropping my p-pump 24v in. Will see some street miles, but mostly track. I plan on going with a 4 link rear, double adjustable qa1s, narrowrd 9inch etc... Where my big question lies is is it necessary to back half. I pulled a measurment...

I have a 188/220 Hamilton cam in a motor I bought that was already assembled. I have to put a new cam gear on for the tone ring for a cam sensor. The previous owner of the engine said he degreed the cam. Was wondering if I can just put it on center. The pistons have .060 valve reliefs. It is a...

I need a pair of motor mounts from a 94-98 12v. Would prefer if all bolts were included, but not necessary. Located in pa. 15332. Will do pay pal. Thanks, Mark.

Hey guys, I'm doing a p-pump 24v, and need to collect some info on some good builders. Its going to be a street strip truck. I'm thinking I might be able to get away with a good 12mm for my goals. So who do you guys suggest that does good work, and has fair prices. Oh and if you already have a...

I would like to get some feed back on some different compound set ups with vp trucks. More so looking for street/strip truck combos with monster/ii dragon fire pumps. I'm probably going to be sticking with the stock head and cam for a bit, but that is up I'n the air. I'm cOnsidering a 63/68 next...

My 94 is giving me a bad vibration at higher speeds. It was bad enough that last time I towed my trailer it cracked the case on my t-case and ruined the internals. I bought new tires, alignment, had them all rotated, new tranny mount, new rear u joints, and pulled the front drive shaft just to...

My quad 4k on my 02 is giving me some trouble. The display stays lit constantly(killing my battery) and I have no control to tune it. When you press the up button it just beeps. I can go through and Select anything else though. This is not a new install either. Had it on the truck for about a...

How Many people have re-usedthe control arms from there lift kit. I have heard of people doing this, so I tried it and have found that the "L" bracket on the fram is about an inch away from the control arm mounts. It looks like if I just cut the bracket off, it will be ok. I am not trying to...

I was on my way home the other day and seen a black qclb in a driveway with a for sale sign. I pulled over and the the owner came out and showed me the truck. It is a 1999 qclb with 182,xxx miles. Very sharp and clean truck. The bottom half of the truck has just had the rust repaired, and been...

<a href="http://s1268.beta.photobucket.com/user/oldblue116/media/truck/phone391.jpg.html" target="_blank"><img src="http://i1268.photobucket.com/albums/jj575/oldblue116/truck/phone391.jpg" border="0" alt=" photo phone391.jpg"/></a>

Is there a difference I'n the throttle cable bracket from auto to manual besides a hole I'n the bracket for the tv cable? Mine has no hole for the tv and I need to drill one. Any help would be great. Thanks, Mark.

Im doing a nv5600 to 47re swap. I bought the auto tranny mount but didnt notice till now that it is either the wrong mount or i am missing a bracket between the tranny and mount. Im 99% positive that it is just a missing bracket tho. All the dodge dealers would be closed by the time i would make...

I am doing a maunal to auto swap and when i bought the tranny/converter it didnt come with bolts. I already have flexplate to crank bolts, now i just need converter to flex plate bolts. Does everybody go to an aftermarket supplier for them? I have searched numerous distributer websites, even...

I have a set of mach 7s out of my 02. They were only run for 4 months in my truck. Great set of injectors. I would like to get $750 and your cores. I paid $1350 for them new.