1stgen parts. Nearly anything you could ever want.

I'll PM you on it.
The price is high, but not "Ebay high".

{edit}
There IS a plug under the dash, but there are 2 versions.
1990-1991 use an odd-shaped plug, 1992-1993 use a flat plug.
The "early" version of the "tach package" (these were NEVER factory installed!) used a 2 wire crank snesor that was inlcuded in the tach package, the late version used the OEM crank sensor in the truck that was used to turn on the charge circuit in the ECM. MN.

Mark.
 
Last edited:
Do you ever come across any 4bt engines? If so I'll make a mental note of it when I'm in the market for one and ready to buy.
 
Mark, what do you have in the way of 4x4 axles? I have a buddy with a set of 3.07's he wants to get rid of for some 3.55's. PM me your number and I'll get him to call you if you don't mind.
 
jrshipper said:
Do you ever come across any 4bt engines? If so I'll make a mental note of it when I'm in the market for one and ready to buy.
Click to expand...
Right now I have a couple of them that need rebuilt.


95-12valve said:
Mark, what do you have in the way of 4x4 axles? I have a buddy with a set of 3.07's he wants to get rid of for some 3.55's. PM me your number and I'll get him to call you if you don't mind.
Click to expand...
All I'd have is a rear 3.55 axle. I also have a pair of 3.07 Dually axles, myself.

Diezeldriver said:
Do you have a decent Extended cab, Cab only
Click to expand...
I have a real nice 1992 E/C, it's 99% rust free, just a spot of floor rust in a very easy to replace area on the passenger's side floor.
It's a loaded cab with doors at the moment, but it can be made to be whatever you need.

Mark.
 
I need a 2wd tranny.Or a 727 output shaft and case. Maybe something that will bolt up to my '90 12 valve. It's going into a '41 Plymouth 2 dr sedan.

Thanks
 
No, all of the ones I thought were good are broken.
Sorry for not replying sooner, was gone picking up junk in OK.

Mark.
 
Mark I tried to pm you but I need 10 posts. If ya could give me a tex on what you might have for a 2wd tranny parts that would work on my '90

Fiv 1 aight 376 O naine fiv 3
 
Last edited:
Right NOW I don't have ANY 727 2WD stuff at all.
I do have a 1992 2WD 518 overdrive core that works until it warms up and plugs the filter.
Of course, I also have some 2WD Getrag stuff, too.

Mark.
 
Last edited:
Drivers side arm rest (grey int). I'm also looking for a tail gate in better shape. I really like the ones on the 89's that have the cummins turbo diesel badge on them.
RonA
 
Ron,
I'll look on he armrest, but they are usually crushed, if not broken as well.

WHICH 1989-1990 tailgate are you referring to?
The one with the brushed trim panel tha has the Doge Ram CTD on it, or the one with no panel and the "DODGE RAM" pressed into the face, with the CTD badge kinda' tucked in the lower right corner?

There's actually 3 trim levels for the early 1stgen CTD tailgates that I have found so far.

Mark.
 
I need all the drivers side body molding for a RCLB. Only want it if its in good shape. Also need the interior plastic that surrounds the headliner(grey). Let me know what you got.

Thanks, Aaron.
 
Aaaron,
Sorry, but I gave up on trying to find even PRESENTABLE side molding for the 1991-1993 trucks.
It's almost impossible to find every piece in nice shape and NOS stuff is basically made of unobtainium, IF you can even find one piece.

As far as headliner trim, all I have is the over door pieces and possibly a NEW rear piece in gray.

Mark.
 
I have the driver side body molding from my '90 single cab and bed molding minus the piece behind the rear wheel.
 
You must log in or register to reply here.
Back
Top