1stgen parts. Nearly anything you could ever want.

jimbo486 said:
I have the driver side body molding from my '90 single cab and bed molding minus the piece behind the rear wheel.
Click to expand...
The gentleman above was asking for 1991-1993 trim, which is totally different from the earlier version of trim.

Mark.
 
The grid heater should be integrated into the intake plate on a 1994.
I should have the whole intake plate for that year.

Mark.
 
Need the metal box bracket under drivers side bucket seat just bracket and little steel rod for tilt lever on passenger side seat let me know if u got it and what you want for it thank you
 
Le front bumper plastics( the parts that sticks out past the actual bumper),
Side mirrors, grill in good condition, and the front turn signal assembly from the wires to the lens. Do you have any of this for a 92'? Thanks

Eric
 
Mark.
I need an alternator bracket like this. Not sure if it's first gen or not.
 

Attachments

  • 001.jpg
    001.jpg
    50.2 KB · Views: 0
Sutter1stgen said:
Le front bumper plastics( the parts that sticks out past the actual bumper),
Side mirrors, grill in good condition, and the front turn signal assembly from the wires to the lens. Do you have any of this for a 92'? Thanks

Eric
Click to expand...

Eric,
I don't believe I can help with anything besides possibly the mirrors (will have lifting or blistered chrome) park lamps and wiring.
On the signal assembly wiring, is yours the pigtail plug-in connector type, or is it part of the front harness and non-removable?

Ron,
You have a PM.

Mark.
 
Do you have a good set of manual pedals, steering column with wheel, and tailgate latch with rods for a 1993 dodge 2500 long bed extended can 4x4?
 
All I have is pedals in a cab, the other stuff I don't have.
I'll have the pedals out by week's end if you need them.

Mark.
 
I need a manual pedal assembly to convert my automatic truck. And the clutch master cyl bracket, with whatever hardware/pieces I will need to swap. If you have anything pm a price shipped to 32773 please.
 
Mark, do you have a 91-93 auto steering column? Or do you know if a second gen column will work in a first gen?

John
 
I do have an auto steering column.
Keep in mind that the CLOCK SPRING and Steering wheels on a 1991 are different from 1992 and 1993.

As far as a 2nd gen column working, there are at least 4 things that are totally wrong, just at a glance.
The jacket length is different.
The connector to the lower shaft is wrong.
The clockspring is wrong.
The way the column mounts to the dash is drastically different.

That having been said, I believe some of the upper tilt mechanism and the ignition switches may interchange.

Mark.
 
You must log in or register to reply here.
Back
Top