2006 Dodge 2500

Status
Not open for further replies.

gearhart73

New member
Joined
Jul 26, 2011
Messages
779
I bought this 2006 as a roller with a rebuilt title to build into a farm truck. It's regular cab 4wd st model truck with 218k miles on it. I went through the front and rear axles to put all new bearings, seals, u joints, and ball joints. And then the build turned into a little more than just a farm truck. So here a quick break down.

6.7 Cummins:
ATS dual fuelers
250% injectors
Fleece distribution block
Airdog 4g
Fleece coolant by pass
Flex a lite fans
Fluid dampener
14mm gorilla girdle
Line bored with cam bushings
Carrillo rods
Hamilton 188-220
Lots of head work
All of the machine work on the block and head was done through Haisley Machine

Trans is a firepunk comp 2 with an upgraded front drive shaft

Air:
Steed speed comp t-4 with dual wastgate ports. Both are capped off right now but you have the option to mount 2 wastegate to it if you wanted later.
Firepunk built 66/84
One 3 intercooler

I put all new AC components on it but haven't had it charged yet

I'm running the 5.9 electronics with the 6.7 engine. Firepunk tuned it with a 5 position switch. For some reason the truck would engage the starter with the key so we put a push button start in it.

The only odd thing I know so far is that the truck vibrates at ideal. I'm not sure if it's due to the semi solid motor mounts or what but as soon as you touch the throttle it smooths right out.

I've only put 200 miles on the build. It drives really nice and it's fun to drive. I just have an opportunity to buy something else so I'm looking to free up some extra cash.

Im leaving stuff out but basically it's 200k mile body and frame with a bunch of new parts around it. Looks like a basic silver farm truck but it laid down 1200hp on the dyno.

I'm located in Kingston, OH 45644

$35,000
 
Last edited:
For 35k I was going to include a new set of 20x10 American eagle wheels wrapped with 420s and a carbon fiber stack I have had sitting around the shop for a couple years but never used. If you don't want those I can drop to $33k. Or if anyone has any other offers.
 
I have the AC charged and working now. I also replaced the front windshield. I'll let it go for $30,000 on stock wheels. I have brackets and joints for tractions bars sitting in the cab too and around 300 miles on the build.
 
Really wish the wife wasn't all wound up about a house, this would be so cool to have. GLWS. P.S. you're old 6spd trans from bacon is still doing great.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
Status
Not open for further replies.
Back
Top