BAMF Sled Pull Edtion build....!!

03f3507.3

03f3507.3

New member
Joined
Aug 2, 2007
Messages
1,585
Welp i know a few of you heard and saw my video to carnage i had a couple weeks ago pulling so i figured id let you all check out the progress and where the newly styled truck stands! truck lost its stacks lift wheels and tires and junk a** sterling rear-end for a big change in looks!

heres some carnage photos!:eek:

DSC_0148.jpg

DSC_0149.jpg

DSC_0150.jpg

DSC_0151.jpg

DSC_0147.jpg


day after the pull the fun began off with the lift, wheels, tires, sterling, and stacks....

DSC_0159-1.jpg

DSC_0160-2.jpg

DSC_0161-1.jpg


heres a teaser for the single stack and roll pan...
will be a single 7x48inch black mitre tho....
DSC_0164-1.jpg

lund roll pan hitch will be getting moved forward reinforced and have sled stoppers...new bds 2.5inch lift now on truck
DSC_0170-1.jpg

DSC_0171-1.jpg


Tires, Lift, wheels and old traction bars loaded up in the haul rig for there trip to the new owner up north:D
DSC_0172-1.jpg

DSC_0173.jpg


as far as new items not pictured i bought a dana 80 dually rear end for the truck which will be getting a detroit locker and new bearings, up front the truck got a 2.5inch BDS leveling kit with all new spring packs, sway bar links, trac bar drop bracket, and 4new shocks, will be fabbing up bump stops, and a weight rack next week...

heres a few pics of the new wheels, tires, and trac bars which are on the way!!

Lazar Smith monster bars adjustable from 81-91inches 1inch heim joines and 2.875inch tubeing...

MonsterCrop2-223x691.jpg


33x12.5x18 Interco STS's

580.jpg


and 18x10 Rolling Big Power T901 rims in black...

RBP-1_Black.jpg


dana 80 and painted roll pan will be under the truck tomro and will be trailered to the driveshaft shop for its new custom 1480 rear drive shaft, new u-jointed front shaft, and 4.10 gears! will post pics as i get them!:ford:
 
i txt'd u a pic of the foord lastnight. its up and done. got to stick ladder bars in still tho. i think the front springs might even be in backwards..... i put the longest side behind axle, opp. of rear. was that right lol.... took it apart one night then forgot the way they went bk in 3 days later.
 
You need to post a link to this thread where MADDOG is bragging how tough those Sterlings are.
 
Norris said:
i txt'd u a pic of the foord lastnight. its up and done. got to stick ladder bars in still tho. i think the front springs might even be in backwards..... i put the longest side behind axle, opp. of rear. was that right lol.... took it apart one night then forgot the way they went bk in 3 days later.
Click to expand...

didnt get that pic but to my knowledge the springs only go in one way due to the eyes on each end accepting a small bolt in the rear and a bigger bolt in the front...
 
03f3507.3 said:
slightly but actually if you watch my video the amount of hopping was extremely minimal....i believe it was due to too much power and too much lift:poke:
Click to expand...

no its from not having balls, letting in and out, load and unloading the drivetrain is not good
 
house said:
no its from not having balls, letting in and out, load and unloading the drivetrain is not good
Click to expand...

yep haha but it wasnt from hopping see:hehe: the dana 80 will be better for the truck anyways so its all good :Cheer:
 
ill know in 20 mins when this ebay auction is over if i am or not
 
"Part throttle" doesn't break stuff like that.....bouncing will. The video clearly shows a hop at the end, and a Dana 80 will break that way as well.

I may be ignorant to acronyms, but what is a BAMF?
 
You must log in or register to reply here.
Back
Top