BAMF Sled Pull Edtion build....!!

bbunting said:
"Part throttle" doesn't break stuff like that.....bouncing will. The video clearly shows a hop at the end, and a Dana 80 will break that way as well.

I may be ignorant to acronyms, but what is a BAMF?
Click to expand...

Bad A$$ ..............?????
 
bbunting said:
"Part throttle" doesn't break stuff like that.....bouncing will. The video clearly shows a hop at the end, and a Dana 80 will break that way as well.

I may be ignorant to acronyms, but what is a BAMF?
Click to expand...

yep hope to cure it with a bringing her back down to the ground....BAMF is Bad A** Mother Fu**er had a set badges made saying this last year and its been stuck as the name of the truck on the forums since then...
 
got the dana 80 under the truck last night and buttoned up all the suspension.....sporting a detroit locker and yukon bearings! Getting ready to head to the driveshaft shop to get the new 1480 rear driveshaft and new yoked front along with some 4.10 gears up front:rockwoot: will get more pics soon when i get the roll pan on and the trac bars mounted up!

ps the truck looks a lot diffrent now haha really wanna get the new wheels, tires and stack to see what it will really look like!

DSC_0176.jpg

DSC_0175.jpg

DSC_0172-2.jpg

DSC_0171-2.jpg

DSC_0173-1.jpg

DSC_0177.jpg
 
i am glad you are getting back together.

i think the plan might have changed on the room arrangements for TS. I think me and you and whoever you bring are in one room and Justin and Luke with significant others/kids are staying in the other room I have reserved at the Ramada since I don't have anyone coming with me. It will be cheaper that way and not a big for only one night. I think me and you will be rolling out that morning to catch all the action at the open house and Luke and Justin are going to haul down Luke's truck and haul your truck back if needed. Sound like a plan? I'll call you later about it.
 
Last edited:
haloman said:
i am glad you are getting back together.

i think the plan might have changed on the room arrangements for TS. I think me and you and whoever you bring are in one room and Justin and Luke with significant others/kids are staying in the other room I have reserved at the Ramada since I don't have anyone coming with me. It will be cheaper that way and not a big for only one night. I think me and you will be rolling out that morning to catch all the action at the open house and Luke and Justin are going to haul down Luke's truck and haul your truck back if needed. Sound like a plan? I'll call you later about it.
Click to expand...

yeah im lost haha call me l8r tonite baout it haha
 
rims are in and roll pan is painted up will get some pics tomro! tires got back ordered till next week and the new stack should be here then also!
 
house said:
hope you didnt use yukon gears
Click to expand...

and i thought i was the only one that thinks those gears suck got some for my gasser and damn thing pull them out

and nice truck it looks better now then before in my eyes not a big fan a lifted trucks
 
Bamf edition is almost complete. Waiting on STSs and working on a front weight bracket.
 
haloman said:
Bamf edition is almost complete. Waiting on STSs and working on a front weight bracket.
Click to expand...

thanks for the update dan will have a really big one tonite when i get the truck back new driveshaft is very pretty haha
 
Hey tyler, about to get my Stroke done. That pitman arm was a 32 spline, on the early 99 it took a 28 so im having a helluva time coming up with one. lol

ill shoot ya some pics of it here soon as it gets back from alignment shop.
 
Norris said:
Hey tyler, about to get my Stroke done. That pitman arm was a 32 spline, on the early 99 it took a 28 so im having a helluva time coming up with one. lol

ill shoot ya some pics of it here soon as it gets back from alignment shop.
Click to expand...

good deal didnt even know about the diffrent splines....:doh:
 
finished fabbing up the bumpstops goin on the truck tonite...in the back ground are my modified traction bar axel brackets to accept 3/4inch ubolts...
DSC_0170-3.jpg


bump stops are 4x4angle iron 1/4inch thick then used a 1 and 3/4inch thread rod with a nut welded on top and have a jam nut for the bottom...
DSC_0171-3.jpg


new 7x48inch mitre freshly painted black...
DSC_0172-3.jpg


roll pan painted and installed hitch getting mounted up tomro!
DSC_0173-2.jpg


front half of new 1480 driveshaft and massive carrier bearing got rid of the weak half ton deal....
DSC_0174-1.jpg


rest of the shaft all greaseable u-joints and slip yokes...
DSC_0175-1.jpg

DSC_0180.jpg

http://i2.photobucket.com/albums/y32/f22pwrdaccord
/DSC_0176-1.jpg

more pics to come as it all comes together!
 
You must log in or register to reply here.
Back
Top