Last edited:
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Best Streetable Cam
- Thread starter smokin06
- Start date
I just took out a set of 6 x .016's. They haze alot at idle and light throttle. I could clean them up ok on the very top with my 64/71 over S480 twins. I have a cam and ported head. Adding 4 more holes is going to be really dirty and really hot. You may run into issues with local LE if you drive it on the street.
I loved my 6x.016 injectors. I couldnt come close to cleaning them up though. One of the best injectors ive ran. Good for the street and plenty of fuel to run a 2.8 Scheid charger without cleaning them up at all. I keep them around and wont sell them incase I just need a good set for something. My buddy uses them in his sled puller also and work great.
I just took out a set of 6 x .016's. They haze alot at idle and light throttle. I could clean them up ok on the very top with my 64/71 over S480 twins. I have a cam and ported head. Adding 4 more holes is going to be really dirty and really hot. You may run into issues with local LE if you drive it on the street.
I agree, if they are as big as you say they are, they will be a dirty and hot running injector, but if you get your twins setup right you might be fine. I have always had ccams in my pulling trucks but not in a strret truck. Last year before i moved up to 3.0 class, i ran a schied street cam in my truck. This is a 12v, i liked it a lot, would run 4-4500 down the track with a maxed 12mm and 2.8 charger. But i also ran 5-22 sized injectors. Never drove the truck on the street, but i am going to put the cam in a strret truck soon. The schied cam would be something to look into, i feel that you will benifit a little be from a cam. Good luck.