CP3 mods

Moore Power said:
What are your future plans for your truck? My plans were always under estimated. When I had my 3k, I went to an LBZ pump with 20 over injectors. When I upgraded to the 4k, I went with a wicked mod. That was ok, but my logs still showed loosing rail pressure. Now with a PPE Duel Fueler, problem solved. You will still want to consider EFI and a good tuner to dial in your truck for performance and safety (your engines).
Click to expand...

My plans are to get a efi live tuned ECM and I want to keep the stock injectors stock rods and pistons. More or less I just was my cp3 to be able to keep up with the demand of a big tune. The a3k will stay, I really didn't want it but the stock charger blew and I wasn't goin back stock.
 
Duramax3000 said:
My plans are to get a efi live tuned ECM and I want to keep the stock injectors stock rods and pistons. More or less I just was my cp3 to be able to keep up with the demand of a big tune. The a3k will stay, I really didn't want it but the stock charger blew and I wasn't goin back stock.
Click to expand...

If the tuning is built correctly, even with large injectors, you'll be able to make enough pressure with a single CP3 to be on the HP border line with a stock engine.
 
IdahoRob said:
If the tuning is built correctly, even with large injectors, you'll be able to make enough pressure with a single CP3 to be on the HP border line with a stock engine.
Click to expand...

When I get back on my feet money wise you know who is tuning my truck. I want to keep stock injectors due to money reasons. Gettin the tuned ECM from you a modified cp3, a manifold and maybe some water is all that is left on the list. The ? Is now what stage arson kit would be best for what my tuneing set up would be. The compleat cp3 is little out of my price range so the kit is bout all I'm able to do and I will even have to waint on that.
 
emiller3 said:
I plan on doing 60% over nozzles when it goes back together and would like to add another charger this summer.I want to get around the 750-800rwp mark.
Click to expand...
Yeah for 750-800 you'll need a big pump or duals! You may want to go just a hair bigger on the nozzles for that goal. Like 70 so you can flow more with less pulse width. Twins will keep up with a 70% nozzle quite nicely.
 
Yea i was looking into the dragonslayer but I cant do it all at once.I was just wanting to get a little more out of the pump i have now without having to spend anything until then.
 
You must log in or register to reply here.
Back
Top