Does anyone have pics of 24v apps on ppump?

[pierce460]

I have them here at the shop...

 

[bsmith]

I have them here at the shop...

Any idea where I can find one? What size is it?

 

[pierce460]

Pm me and ill get you set up.... Its treaded 6x1.0 mm

 

[cummins02]

I went to our local impliment dealer they had all different sizes.

 

[bsmith]

I went to our local impliment dealer they had all different sizes.

Dang i didnt think of that.

 

[cummins02]

Ya its kinda handy to have those types of places around.

 

[TURBOLVR]

here you go:

 

[pierce460]

Looks pretty much like my setup... I have less than $20 in....

 

[TURBOLVR]

the main difference is the cruise and trans cables are still attached and functional like stock,and uses NONE of the 12v linkage. The APPS could even be returned to a stock 24v if needed.

 

[bsmith]

the main difference is the cruise and trans cables are still attached and functional like stock,and uses NONE of the 12v linkage. The APPS could even be returned to a stock 24v if needed.

I didnt realize that you didnt use any part of the linkage. I was planning to use the front part of the linkage, but i guess i dont need to after seeing the pics.

Thank you for posting those.

 

[LReiff]

I'll have to try this on mine.

 

[cummins02]

I like how mine turned out and works.

 

[91shelbydaytona]

What are you guys using for fuel inlet fitting with the apps installed? The banjo i got from turbolvr has 3/8 barbed and i need one 1/2 to fit my airdog line.

 

[cummins02]

Right now i have mine reduced from 1/2 to 3/8 to untill i have time to find what i want.

 

[bsmith]

here you go:

Do you remove the sensor on the APPS?

 

[pierce460]

What are you guys using for fuel inlet fitting with the apps installed? The banjo i got from turbolvr has 3/8 barbed and i need one 1/2 to fit my airdog line.

If you look at the picture of mine thats why there is more cut from it so that you could use 1/2 lines.... Also you dont have to use the banjo fitting..

 

[TURBOLVR]

Do you remove the sensor on the APPS?

nope.

If you look at the picture of mine thats why there is more cut from it so that you could use 1/2 lines.... Also you dont have to use the banjo fitting..

You also have no cruise or trans cable.:bang


does anyone realize the PUMP has a 3/8" inlet??
all that is needed to run a 1/2" line or a dual feed is a 90* fitting. :Cheer:

 

[91shelbydaytona]

You also have no cruise or trans cable.:bang

exactly

 

[connermcpherson]

Im running -10an to a 14x1.5 an on the pump off a T cause my pump is dual fed

 

[TURBOLVR]

I redesigned the bracket so the stock APPS is more forward to clear the fuel inlet allowing near any feed line and the no need to trim the APPS anymore.
Simpler AND better.