Does anyone have pics of 24v apps on ppump?

Ok thanks. My pump isnt out of a dodge so it doesn't have the holes from the old bracket. Any other ways/ideas on how to mount it on there? There's 2 bigger holes that line up with the apps but there like the fuel inlet size anyway those could work?
 
You'd have to make inserts for the bolts to mount it in those holes. Pretty easy on a lathe.
 
so with your current set up will i be able to run the type of fitting that sticks strait out of the pump and connects to a 90deg elbow and connects to 1/2line looks like this: http://www.vulcanperformance.com/PhotoDetails.asp?ShowDESC=N&ProductCode=M1006 (threads into the pump)

http://www.vulcanperformance.com/PhotoDetails.asp?ShowDESC=N&ProductCode=POET6 (connects to fuel line)

basicly use the fittings i have on my vp. fittings that came with the "big line kit" that goes from the vp to the fuel filter.

will that work? or do you supply the fitting that goes to the pump and connects to 1/2"line?


also what linkage do you need to have on the rod sticking out of the pump for the throttle? does your kit come with it all that needed? or do i have to have any part off a 12v linkage?
 
Last edited:
refer to post #55 on the 1/2" fittings.

no 12v linkage needed. just the mount for the lever that clamps to the rod on the spline.
 
blackcoal said:
so with your current set up will i be able to run the type of fitting that sticks strait out of the pump and connects to a 90deg elbow and connects to 1/2line looks like this: http://www.vulcanperformance.com/PhotoDetails.asp?ShowDESC=N&ProductCode=M1006 (threads into the pump)

http://www.vulcanperformance.com/PhotoDetails.asp?ShowDESC=N&ProductCode=POET6 (connects to fuel line)

basicly use the fittings i have on my vp. fittings that came with the "big line kit" that goes from the vp to the fuel filter.

will that work? or do you supply the fitting that goes to the pump and connects to 1/2"line?


also what linkage do you need to have on the rod sticking out of the pump for the throttle? does your kit come with it all that needed? or do i have to have any part off a 12v linkage?
Click to expand...

Don't believe that 90 degree fitting will work, he made it as close as he possibly could for some reason. You need to use a 90 that has a long curved part like in post #55.
 
oh okay, well does the kit you sell come with one that will work turbolvr? or do you sell those seperate?
 
I dont sell them. These were made to work for stock, 3/8 and dual 3/8" lines. The guys with 1/2" or larger lines need to use a fitting like SHughes used, or run 1/2" to 3/8" @ the inlet. The actual pump inlet fitting bore is closer to 1/4" anyway.
 
Last edited:
You must log in or register to reply here.
Back
Top