Fummins Speed Steed

Tufluk

Tufluk

Lots to learn
Joined
Sep 29, 2011
Messages
22
Anyone running a Speed Steed on a OBS or Super Duty Fummins?

If you've got pics of fitment and specs on what turbo(s) your running..please share.

Thanks.
 
Running a t4 flipped upside down. Turbo is a s468 with .90 exhaust housing. Clears everything fine.

Sent from my ADR6350 using Tapatalk 2
 
I am planning on a SteedSpeed for mine, but I don't know if it's going to be a bolt on project or require some customization. Either way I'll get the sucker in there.
 
Been wondering the same thing. Thinking if going with a straight flange steed for some better good clearance
 
I put a t4 steed on a 05 with a 12 valve. Runs a 64 over a 480 with a ED 50mm external gate. It was custom built with the flange angled a bit more than a stock manifold would have upside down and the waste gate sits at about a 45 on top as well. Its a cluster f#$% of epic proportions and it takes 3 full grown men and a well trained monkey to get it all stuffed in there. Runs good though!
 
ninerqb8 said:
I put a t4 steed on a 05 with a 12 valve. Runs a 64 over a 480 with a ED 50mm external gate. It was custom built with the flange angled a bit more than a stock manifold would have upside down and the waste gate sits at about a 45 on top as well. Its a cluster f#$% of epic proportions and it takes 3 full grown men and a well trained monkey to get it all stuffed in there. Runs good though!
Click to expand...

Pic's or GTFO lol
 
TRUBBS said:
Pic's or GTFO lol
Click to expand...

Well crap. I will have to get some of the new setup. I have a few of the old setup with the ATS manifold and no external gate. I will be putting injectors in next week so I will get pics then since the 64 and the gate have to come off to get to the injectors.:nail:
 
Some not so good pics of steed speed in 99.

Sent from my ADR6350 using Tapatalk 2
 

Attachments

  • uploadfromtaptalk1351392098173.jpg
    uploadfromtaptalk1351392098173.jpg
    60.9 KB · Views: 0
  • uploadfromtaptalk1351392166334.jpg
    uploadfromtaptalk1351392166334.jpg
    51.4 KB · Views: 0
Ok I got the pics finally. You can fit 15 gallons of s%$# in a 5 gallon bucket.

20121031_082342-1.jpg

20121031_082338.jpg

20121031_082334.jpg

20121031_082328.jpg

20121031_082324-1.jpg

20121031_082319.jpg

20121031_082342.jpg

20121031_082324.jpg
 
:clap: Well done sir! Very clean install! Magazine material again I'm afraid.....
 
ninerqb8 said:
Ok I got the pics finally. You can fit 15 gallons of s%$# in a 5 gallon bucket.

20121031_082342-1.jpg

20121031_082338.jpg

20121031_082334.jpg

20121031_082328.jpg

20121031_082324-1.jpg

20121031_082319.jpg

20121031_082342.jpg

20121031_082324.jpg
Click to expand...

Im gona have alot of questions coming your way. I already have twins on my fummins but plane on getting a manifold and external gate this winter.
 
ninerqb8 said:
Ok I got the pics finally. You can fit 15 gallons of s%$# in a 5 gallon bucket.

I'm a detail nut and you have it all covered, really nice job! I'd say take some really good still photos and submit them to a mag!

Jim
Click to expand...
 
Who's piping is that? Very nice attention to detail..!


Sent from my F'n space phone
 
ninerqb8

What's the sound liner on the bottom of the hood? it make a difference?
 
You must log in or register to reply here.
Top