fordpickupman
New member
- Joined
- Jul 19, 2013
- Messages
- 106
What's the scoop on this new lift pump on your website?
What kind of volume and pressure does it deliver?
What kind of volume and pressure does it deliver?
Is this the one you guys were working on with ghostman?
We are rapidly accruing miles on my daily driver, as well as a couple of other 12 valves that we can keep an eye on, so far so good. The stage 1 is mild enough that I suspect it will hold just as good as a stock pump, although it is capable of much more pressure which depending on overflow valve setup, could put more wear on the seals.How many miles/hours have you put on one so far? Curious about longevity once it's modified.
Well, keep up the good work. I'd love this over a noisy electric lift pump if it's just an update on the old design and it truly is reliable.
Are there concerns about cam lobe wear with what I'm assuming is a larger bore = more force to push more volume?
The A1000 is a pretty good setup, the problem with it and any other electrical pump is they struggle to maintain volume and decent life expectancy when pressure is set in the 45+ psi range.In for this. Might fit my truck better then the A1000 setup
We tried shimming the stock spring, it gets into coil bind before we saw useful flow gains in the upper rpm range. Yes, our stage 1 pumps do have higher spring force to prevent floating in the higher rpm range.Probably shimming the spring inside?
We are going to release a stage 2 pump because I eventually want a mechanical cam driven pump that will flow enough to keep up with my Junker Drag Truck's fueling needs. Currently, my 650 cc 12mm pump can pull a stage 1 down to zero psi at full rack travel, so no, it's not enough lift pump to support a tuned up 13mm pump.i'm interested in this pump also. it will be feeding a 13mm p7100 if it can keep up.
are you going to offer a stage 2 pump? i would rather use a mechanical pump than the 2 electric pumps i currently have, but they do keep it at 70psi
thanks, ed
However, our stage 1 mechanical lift pump with a simple 140 GPH electric pump force feeding the mechanical pump will keep up with my 650cc pump and maintain about 50 psi pressure.
Is there a certain sized line that needs to be ran with the stage 1?