HX52

I will get it out of the bag and take some pictures of it tonight. It is a T4 flange with a 16cm wastegated housing.
 
Last edited:
HX52's are t4i flanges. The ports are the same but the hole pattern is abit different. I had to wobble the holes out abit to fit my t4 ATS manifold.
 
I have these turbos all the time and I can for sure tell you I've never seen one with a 64mm wheel they only come in 67/71/16 with the billet wheel if its a lagit hx52 or the bigger one that has a 71mm wheel.
 
I don't know when it would come to life, I never eNding it. But it would depend on how your set up is.
 
On my 12v it was fully spooled by 2200 but if its goin on a 24v or common rail then expect alot faster expesially on a common rail. Most boost I ever saw was 63lbs but that was balls to the wall
 
I have these turbos all the time and I can for sure tell you I've never seen one with a 64mm wheel they only come in 67/71/16 with the billet wheel if its a lagit hx52 or the bigger one that has a 71mm wheel.

Mine was a 64
 
Top